• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 683 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPDLCR2000EVM: DLPDLCR2000EVM monochrome/grayscale mode and refresh rate?

Kirill Ahmedov
Prodigy 10 points
Part Number: DLPDLCR2000EVM
Other Parts Discussed in Thread: DLPC2607,

is there a grayscale or monochrome mode for the Lightcrafter 2000 like there is for other lightcrafter?

This mode allows to use higher refresh rate in cost of monochrome or grayscale projection.

  • 0
    TI__Mastermind 28005 points
    Kirill,

    Thanks for your interest in our DLP products.

    The DLPC2607 (the controller for this EVM) does not have a monochrome feature, unfortunately. If you wants the specifics of what framerates can be achieved with this system, I recommend you review the DLPC2607 datasheet (www.ti.com/.../dlpc2607.pdf).

    In general, this system achieves 1-60 Hz framerate, with some limited 120 Hz framerate applications (such as 3D). 3D is supported with the DLPC2607 chipset, but not supported in the DLPDLCR2000EVM specifically.

    I hope this helps.

    Best Regards,

    Philippe Dollo