• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 527 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC2607: Sequence LUT Data Structure

Gethn Pickard
Prodigy 20 points
Part Number: DLPC2607

Dear Sir/Madam

I cannot find any information on the data structure of the SEQ LUT Register. I have been able to write to it but I don't know what to write. I've been working from the "DLP2607 Software Programmer's Guide" document. Is there any other documentation?

Many Thanks

Gethn

  • 0
    TI__Mastermind 28005 points
    Gethn,

    Welcome to the E2E forums, and thanks for your interest in our DLP technology.

    What are you trying to modify in your sytem? Furthermore, what is your platform? Are you on a custom board or an EVM?

    Best Regards,
    Philippe Dollo
  • 0 in reply to Philippe Dollo
    Prodigy 20 points

    Philippe,

    I am using a Lightcrafter 2000 EVM with a Beaglebone Black. We are trying to replace the optical engine of the Lightcrafter2000 with our own unit and LEDs. Therefore I would like to be able to change the PWM sequences and CMT. There doesn't seem to be enough information in the "DLP2607 Software Programmer's Guide" on the structure of these. I can set the LED currents and I can read/write to the LUTs but I don't know what to write.

    Many Thanks

    Gethn

  • 0 in reply to Gethn Pickard
    TI__Mastermind 28005 points
    Gethn,

    The LightCrafter 2000 EVM is for evaluation purposes only, so we do not support implementation of custom sequences on the platform. If you want to create your own system with custom sequences, you will need to create a new spin of the board or request firmware.

    Best Regards,
    Philippe Dollo