• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 261 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/DLP2000: DLP2000

samir lehaff
Intellectual 495 points
Part Number: DLP2000

Tool/software: Linux

Dear Forum,

my present structured Light application, currently being evaluated on the  dlp2000 evm, requires me to set a neutral gamma curve, 'No Gamma'. Any suggestions on how to load a neutral gamma curve on the dlp2000 evm.

Thanks in Advance

Samir Lehaff

  • 0
    TI__Mastermind 28005 points

    Samir,

    It sounds like you are trying to switch the degamma settings on this system. I can assist with the process of modifying your firmware to change the degamma setup for your system. Please contact me in private message so I can assist you further. I have added you as a contact on E2E to facilitate this.

    Best Regards,
    Philippe Dollo