This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPDLCR2010EVM: unmounting the DLP2010 module from the optical engine

Part Number: DLPDLCR2010EVM

Can I remove the the DLP 2010 module from the optical engine it is mounted to so I can use my own source and coupling optics?

Thanks!

-Alex

  • Alex,
    Welcome to DLP forum and thank you for your interest in DLP technology.

    Yes, you should be able to unmount DLP2010 DMD from the optical engine of DLP2010 EVM. While disassembling please , make sure that flex cable is not damaged. Please also ensure that DMD is secured in the connector of the flex cable while in operation. Any loose connection or signal noise mat cause permanent damage to DMD.

    regards,
    Vievk