DLPC3435: VDD_PLLM & VDD_LLD Max & Typ Current, Error in Datasheet

Eugene Rice

Part Number: DLPC3435

The DLPC3435 datasheet page 16 has VDD_PLLM Imax=6mA, Ityp=112mA. Ditto for VDD_PLLD. Obviously this is a mistake, since you can't have Imax < Ityp.

What are the real numbers please.

over 7 years ago

0 Nadine Estermann over 7 years ago

TI__Genius 10475 points

Hello Eugene,

Thank you for pointing that out.

We are looking into that and fix it in the next revision of the datasheet.

Best regards,

Nadine

0 Eugene Rice over 7 years ago in reply to Nadine Estermann

Prodigy 235 points

OK I'm glad you are revising the datasheet. Meanwhile, what are the correct numbers?

0 Nadine Estermann over 7 years ago in reply to Eugene Rice

TI__Genius 10475 points

Hello Eugene,

I looked at the datasheet again and I agree it is confusing.

Anyways I checked our numbers and the typical value of 112m A for IDLE disabled WVGA 60Hz includes the 1.1V core, the MCG PLL and the DCG PLL.

The three voltages are supplied by one supply in the system and are therefore measured together.

The correct number is 112mA (for IDLE disabled WVGA 60Hz).

Best regards,

Nadine

DLP®︎ products

DLP products forum

DLPC3435: VDD_PLLM & VDD_LLD Max & Typ Current, Error in Datasheet