DLP3010: DLP3010 3D model

guoping wu

Prodigy 30 points

Part Number: DLP3010

Hello,

We will use DLP3010, can we get the 3D model file as igs or stp? Thank you very much.

over 6 years ago

0 Philippe Dollo over 6 years ago

TI__Mastermind 28005 points

Guoping,

Have you checked out the DLP3010EVM reference design files available on TI.com? They are linked at:
www.ti.com/.../tida-00384

If you are looking for the optical engine reference design specifically, it is linked in that page. You can access it at:
www.ti.com/.../dlpa079

I hope this helps. Let me know if you have further questions.

Best Regards,
Philippe Dollo

0 guoping wu over 6 years ago in reply to Philippe Dollo

Prodigy 30 points

Hi Philippe,
Thank you very much for your reply. I checked out as you listed link every. But I just need the DMD chip 3D model, without the DMD model in download assembly. We are useing DLP3000 on our current product, the DLP3000 will be EOL, so we need redesign some parts base on DLP3010 and keep curent mechanical structure as much as possible. Of course, I can build the 3D model of DMD, refer to the dada sheet. If can get the 3D model from TI, it is more authoritative and have more specific. Thank you again.

0 Philippe Dollo over 6 years ago in reply to guoping wu

TI__Mastermind 28005 points

Guoping,

I'll verify whether we have anything of the sort and try to get back to you within a few days. Thanks for your patience.

Best Regards,
Philippe Dollo

0 Philippe Dollo over 6 years ago in reply to Philippe Dollo

TI__Mastermind 28005 points

Guoping,

Unfortunately, I don't believe we have reference materials outside of the reference design materials available above.

I apologize for the inconvenience.

Best Regards,
Philippe Dollo

0 guoping wu over 6 years ago in reply to Philippe Dollo

Prodigy 30 points

Philippe,

Thank you again whatever. I have get the 3D model file from TI someone supporter.

DLP®︎ products

DLP products forum

DLP3010: DLP3010 3D model