TMS320c5535 ezdsp

Samuel Christopher

Other Parts Discussed in Thread: TMS320C5535

hello

can u help me out in seeing outputs in ccs 4.2.4 by sorting out different examples by using TMS320c5535 ezDSp boards,is there any link pages to getting started and to run available application or examples for the board.send the useful information

Thanks & Regards

J.D.Samuel Christopher

over 10 years ago

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi,

I would like you to go through: http://support.spectrumdigital.com/boards/ezdsp5535/revc/files/EZDSP5535_QuickStartGuide.pdf

In the doc there is a mention of project: \ccsv4\emulation\boards\ezdsp5535_v1\tests\led

Regards,

Gautam

0 Jon M over 10 years ago

TI__Intellectual 840 points

J.D. Samuel,

In addition to the link that Gautum provided, here is a link to full support page for the 5535 eZDSP by Spectrum Digital.

http://support.spectrumdigital.com/boards/ezdsp5535/revc/

Here you can find the Quick Start Guide, as well as schematics and example code.

Regards,

-Jon

0 Sudhakar Kumar over 9 years ago

Prodigy 80 points

Hello, I just want to know whether I can interface PIR Sensors or some other sensors to 5535 EZ DSP.... I would be glad to receive some useful response from your side. Or, Can a daughter Board be attached with 5535 EZ DSP??

0 Steve Tsang over 9 years ago in reply to Sudhakar Kumar

TI__Mastermind 23785 points

C5535 ezDSP does not have a daughter card. One option is the Expansion Connector. You could refer to the schematic for signals available on the connector and to build HW for it.

Regards.

0 Sudhakar Kumar over 9 years ago in reply to Steve Tsang

Prodigy 80 points

Sir, I got your point. It means that I can interface PIR Sensor with 5535 EZ DSP using the expansion connector. But should I connect directly the PIR Sensor to the pins of Expansion Connector or there is some circuitry to be attached?? If some circuitry is required, it would be better if you could mention that circuitry for interfacing PIR Sensor with 5535 EZ DSP.

0 Steve Tsang over 9 years ago in reply to Sudhakar Kumar

TI__Mastermind 23785 points

Have you review the schematic to see if those signals available on the expansion connector meet your need? I do not have a reference design for you to copy.

Regards.

0 Sudhakar Kumar over 9 years ago in reply to Steve Tsang

Prodigy 80 points

http://support.spectrumdigital.com/boards/assy515102/revb/files/assy515102_Schematics_RevB.pdf

I visited page number 2 of this document but I couldn't figure out whether PIR Sensor can be interfaced. If yes, how is this gonna happen?? Please take me out of this problem.

0 Steve Tsang over 9 years ago in reply to Sudhakar Kumar

TI__Mastermind 23785 points

This is the C5535 ezDSP Spectrum Digital's suuport site: http://support.spectrumdigital.com/boards/ezdsp5535/revc/

And this is the schematic:

Schematics
Board schematics.

PDF - 08/26/11

Regards.

Processors

Processors forum

TMS320c5535 ezdsp