how to program the EVM NOR flash?

Hi,

Once a boot image (*.bin) is generated, customers can burn the boot image into the NOR Flash, NAND Flash, 16-bit SPI EEPROM, I2C EEPROM, and MMC/SD card, on the C5515 EVM through a utility called programmer that runs on C5515 using an emulator with Code Composer Studio™ software.

The programmer file is present in the CSL example folder which can be downloaded from the below link

http://www.ti.com/tool/sprc133

Refer to the folder:  c55_lp\c55_csl_3.04\c55_csl_3.04\c55xx_csl\ccs_v5.0_examples

First, load the programmer.out using the Code Composer Studio by selecting “Load Program…” under the Target menu in CCS.

Next, run the program, when the user will be asked to input the filepath and filename for the boot image:

C5515 ...Input <filepath>

Also suggest you to refer to : SPRABD7B

Hope this helps.

Regards

 Vasanth

what example in the folder:  c55_lp\c55_csl_3.04\c55_csl_3.04\c55xx_csl\ccs_v5.0_examples?

The "programmer" example does not work :-(.

What is the error message you are getting ?

Regards

 Vasanth

You tested the last vertion of CSL example "programmer" to program the EVM's NOR Flash ?

Is this only problem in my computer?

can you please point to the instructions for using the "programmer" example?

I cannot find the "programmer example" instructions.

This is for the C5515 EVM:

http://processors.wiki.ti.com/index.php/C5515_Boot-Image_Programmer

Regards.