sd card accessing on ezdsp c5535 kit

vatsa sri

i am using an Ezdsp c5535 kit. the kit has a 2gb sd card slot. I want access it for storing some data from my program so that it cannot be erased when i switch off the board.

pls tell me the commands used to write and read data from the sd card, or guide me to any examples if available.

Thanks and regards,

Srivatsa

over 9 years ago

0 Vasantha K over 8 years ago

TI__Genius 12575 points

Hi,

You can refer to CSL based SD examples by downloading and installing the CSL package from the below link.

http://www.ti.com/tool/sprc133

There exists example on SD card - CSL_MMCSD_SdCardExample_Out, i did try this and it works.

Also, if you need further details with respect to C5535 eZDSP, then you could refer to the following link (from Spectrum digital).

http://support.spectrumdigital.com/boards/ezdsp5535/revc/

Hope the information helps.

Regards

Vasanth

Processors

Processors forum

sd card accessing on ezdsp c5535 kit