CCS/TMDX5535EZDSP: while I run CSL example , it's shows "Error initializing emulator ,"

user3540741

Part Number: TMDX5535EZDSP

Tool/software: Code Composer Studio

Hi expert

I buy on ezdsp5535 from your website. and it's ok when i run the example(download from support.spectrumdigital.com/.../) such as "aic3204, UART ect.", but while I run CSL example (download from software-dl.ti.com/.../index_FDS.html)"CSL_SPI_example_out,CSL_UART_damExample,etc" it's always shows ,"C55xx: Error initializing emulator ", why this happen?

is there anything wrong with emulator?

thanks for you help

Ralf

over 6 years ago

0 Lalindra Jayatilleke over 6 years ago

TI__Mastermind 30365 points

Ralf,
I don't think there is anything wrong with the emulator since you were able to load/run the examples from Spectrum Digital.
Did you use the same target configuration as when it worked?

Lali

0 user3540741 over 6 years ago in reply to Lalindra Jayatilleke

Prodigy 160 points

Hi Lali

Thanks for your response , I agree with you there no problem with emulator . and I do use the same target configuration. it so confuse me.

the failure project is CSL default setup, it's TI examples. target configuration is 5505.

0 Lalindra Jayatilleke over 6 years ago in reply to user3540741

TI__Mastermind 30365 points

Ralf,
Is this issue still open? Did you try the following for the emulators?

Texas Instruments XDS100v2 USB Debug Probe
or
Spectrum Digital DSK-EVM-eZdsp onboard USB Emulator

Lali

Processors

Processors forum

CCS/TMDX5535EZDSP: while I run CSL example , it's shows "Error initializing emulator ,"