C5000 Ultra Low Power DSP

Browse by Tags

C5000 Ultra Low Power DSP

Welcome to the C5000 Ultra Low Power DSP Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".

Tags
You have subscribed to this tag. To view or manage your tag subscriptions, click here.   Close
You have unsubscribed from this tag. To view or manage your tag subscriptions, click here.   Close
You are currently viewing:
CSL
Related Posts

  • Forum Post: Re: How do I install the Chip Support Library so it shows up with other peripherals in the DSP/BIOS config file?

    Brad Griffis
    CSL GUI configuration was a feature of DSP/BIOS. However, that feature was dropped from DSP/BIOS after 4.90.
    on Jul 26, 2008

  • Forum Post: Re: How do I install the Chip Support Library so it shows up with other peripherals in the DSP/BIOS config file?

    TimHarron
    JohnAtANS Ouch! That's one of the main reasons chose a TI DSP for my latest project. I didn't technically need a DSP, but on past projects the GUI CSL made it really easy to get started and try various what-ifs. Is TI losing their edge, or their will to compete, or anything like that? I sincerely...
    on Jul 29, 2008

  • Forum Post: USB sample code (CSL) for C5506 or similar?

    Brian Willoughby
    I have read SPRU596A and SPRU511 as well as scanned the csl_usb.h header, and I think I have a decent start on programming a USB Device firmware for the C5506. However, it would really help to see some sample code. I could not find anything installed with CCS3. Any pointers would be welcome.
    on Oct 5, 2009

  • Forum Post: C55x

    MA16150
    Hi, I am starting to use the following C55x variants: C5510A, C5505, C5504 Question on C5510A: Is this processor the same as the C5510 v2.2? If yes, does that mean I can use the same CSL macro (CHIP_C5510PG2_2) and CSL library csl5510PG2_2x.lib? If no, how do I get the CSL library for this...
    on Oct 26, 2009

  • Forum Post: Getting started with the TMS320VC5505 ezDSP USB Stick...looking for libraries

    Andrea Zanelli
    I'm trying to getting started with the TMS320VC5505 ezDSP USB Stick but I'm very new and I'm having some problems in enabling CCS v4 to use CSL and in finding libraries and make them work correctly. In particular I need help on setting the enviroment to use the CSL because the guide in the...
    on Feb 5, 2010

  • Forum Post: Isochronous USB endpoint example?

    Brian Willoughby
    Is there a CSL example showing working Isochronous USB communication? I have an application where I need two isochronous IN endpoints with a rather large payload (375 to 500 bytes). The C55x USB sample code that I have only has partial isochronous source code which is incomplete and commented out. Has...
    on Feb 6, 2010

  • Forum Post: Code Generation Tools Release for VC5505 CSL

    TommyG
    I wanted to let everyone know that a bug was discovered in the v4.3.3 of the Code Generation Tools (Compiler) that made USB enumeration fail on the USB example1 for the CCS3.3 examples. It most likely was causing other problems as well. The bug was carried through v4.3.4 and v4.3.5 releases. It has been...
    on Feb 26, 2010

  • Forum Post: How to start with EVM 5505

    steffen_ger
    Hello, I`m a student and new to DSP programming (and µC) and my current work is to compare the TMS320C5505 with current µC for my company. So I have many questions but I think I will ask the most urgent first ;-) 1. First of all I checked the IDEs CCS 3.3 and CCS 4.x Do you recommend...
    on Mar 18, 2010

  • Forum Post: Re: DSP/BIOS Audio examples for TMS320C5505 EVM

    Mark Mckeown
    Hi Mladen, We do not have any audio examples that use DSP/BIOS, but the CSL ( find the latest CSL here ) includes a good example that uses DSP/BIOS for a USB Mass Storage Device. It is probably the best starting point for a DSP/BIOS audio pass-through program. Most of the .tcf file is already...
    on Mar 23, 2010

  • Forum Post: CSL I2S examples. Buffers doesnt match in I2S loopback test.

    Stefan Gram
    Hi. I'm trying to run the I2S examples from CSL on the 5505 USB Stick (The examples from ..\TMS320VC55XCSL-LOWPWR\c55xx_csl\ccs_v4.0_examples\i2s directory you get when you install TMS320VC55XCSL-LOWPWR-2.0.0.0). But I get I2S Read & Write Buffers doesn't Match!!! CSL I2S DMA MODE...
    on Apr 7, 2010

  • Forum Post: Hacking the Data Converter Plugin to support other serial ADCs, and importing code to CCSv4.1.. and of course... nothing works. :(

    FastFourier
    So I'm working on a new design here at work, and the hardware engineer decided on a C5510 and a Linear Tech LTC1407 serial ADC. Since I've never used a C55xx before, and don't know how its DMA engine compares to the EDMA3 from C6000s, I thought I'd try to use the Data Converter Plugin...
    on Apr 21, 2010

  • Forum Post: Re: CSL HS USB

    Hyun Kim
    Hi, Can you tell me which exaxt device number you are interesting? We have a couple of differenct CSL versions. Regards, Hyun
    on Apr 22, 2010

  • Forum Post: Re: CSL HS USB

    Hyun Kim
    Hi, Can you tell me which exaxt device number you are interesting? We have a couple of differenct CSL versions. Regards, Hyun
    on Apr 22, 2010

  • Forum Post: CSL MMC/SD examples fail for TMS320VC5505 evaluation module with MDK PO daughterboard (TMDXMDKPO8328)

    Jane Mulligan
    I am trying to save acquired sensor data from the Pulse Oximeter TMS320VC5505 DSP Medical Development Kit (MDK) to the onboard SD card, so I thought I would start with the TI CSL examples. All of the mmc_sd examples run on the EVM C5505 without the MDK daughter card, but they fail when it is installed...
    on Apr 26, 2010

  • Forum Post: Re: CSL MMC/SD examples fail for TMS320VC5505 evaluation module with MDK PO daughterboard (TMDXMDKPO8328)

    Jane Mulligan
    To follow up, we were informed that our EVM5505 boards were obsolete (although we only bought them with the MDK PO kit a few months ago) so we switched to the newer (?) EVM5515 board. The problem with the SD card and the MDK PO daughterboard remains the same however. For example, the CSL_MMCSD_SdCardFSExample...
    on May 14, 2010

  • Forum Post: Re: How to measure MIPS on C55xx?

    Hyun Kim
    Hi, Yes, there is a way to know how much consumues your code. You can utilize Timer in C55xx device. The example code attached. You can see how Timer used in the code. If you have any question, please let us know. Regards, Hyun
    on May 18, 2010

  • Forum Post: Re: DMA sync events are MIA

    FastFourier
    OK. Here comes the big DUMP of info. :) CCSv4.1.2.00027 BIOS : 5.41.02.14 Code Gen Tools : TI v4.3.5 I'm using the c55 CSL RMK macros to setup the McBSP and the DMA registers. Here's the McBSP setup. adc->serial.sConfig.spcr1 = \ MCBSP_SPCR1_RMK( MCBSP_SPCR1_DLB_OFF, ...
    on May 25, 2010

  • Forum Post: Re: DMA sync events are MIA

    FastFourier
    And here's the DMA setup. // Set our DMA channel 1,0 depending on which is correct. adc->uiDmaChanRx = adc->nWhichADC; // Open the DMA channel and save off the handle. adc->hDmaRx = DMA_open( adc->uiDmaChanRx, DMA_OPEN_RESET ); // Check for valid. if( INV...
    on May 25, 2010

  • Forum Post: Re: USB Storage Class and Audio Class Driver

    Hyun Kim
    Hi, 1. USB Storage Class We have one example code. USB SD mass storage device. It's using C5505 Chip Support Library (CSL). 2. USB Audio Class We have also one audio example. PC media player plays a song and audio data brought to DSP through USB and sent to audio CODEC. The...
    on May 28, 2010

  • Forum Post: Re: C5515 Clock Generator / PLL Documentation?

    TommyG
    Jason, You are correct that the Clock Generator is similar between the VC5505 and the C5515, but there have been some enhancement to the newer device. The C5515 System Guide should be available by the end of June. In the mean time, you can find details on differences between the VC5505 and C5515 at...
    on Jun 2, 2010

  • Forum Post: Re: Setting core version for 5510A

    TommyG
    John, This is confusing. I'm not sure of the history of the chip definitions, but for some reason C5510A was never used. The correct options for the C5510A device are: -d"CHIP_5510PG2_0 for the preprocessor and -v5510:2 for the compiler. You can see this in any of the CSL examples...
    on Jun 10, 2010

  • Forum Post: Re: No csl in CCS4

    TommyG
    John, The CSL package is located here: http://focus.ti.com/docs/toolsw/folders/print/sprc133.html . Pick the version you need from the table on this page. The devices supported by each release are listed in the top of the table. Regards.
    on Jun 16, 2010

  • Forum Post: Re: FAT32 Support for SD Card

    Hyun Kim
    Hi Joe, That's good that you can run the FAT example code. The current CSL does not include fopen() type function for SD card in the ATAFS library. The example code only creates a new file in SD card. We are working on an example code that opens the existing file. When it's available, I'll...
    on Jun 21, 2010

  • Forum Post: Re: FAT32 Support for SD Card

    Hyun Kim
    Hi Joe, File open and a few more functions are available. Please try it. Regards, Hyun
    on Jun 22, 2010

  • Forum Post: Re: bootloader

    TommyG
    Robert, If you are not using DSP/BIOS, then you need to create your own linker command file (or use a pre-existing file). You didn't say which device you are trying to use, but since you are planning on using CSL that should help you. Both versions of CSL (Std and Low Power) come with example...
    on Jun 22, 2010
1234

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2013 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use