RE: Not able to Start with the TMDSEVM6472LE new kit With CCSv4.

Naveen4u

Hi myself Naveen I am started working on TMDSEVM6472LE new kit With CCSv4 in windows 7 -32 bit PC I referred all documents provided with the kit,

1.> I am facing problem at execution of out of box demo 1st i connected Ethernet cable between kit and PC and i change Ip address to 192.168.2.101 for PC then connect power and usb cable and open the browser type IP address 192.168.2.100 then it shows web page not available. then I used Ethernet Router switch between kit and system then also it shows same error, So please help me to get out of this.

2.> If you have any materials /documents to start with the kit to do demo applications please share with me.

over 8 years ago

0 Naveen4u over 8 years ago

Intellectual 520 points

Is their any document to use MCSDK that is provided with tmdsevm6472le kit.

0 Titusrathinaraj Stalin over 8 years ago

TI__Guru** 116100 points

Dear Naveen,
Please refer to the following TI wiki pages.
processors.wiki.ti.com/.../BIOS_MCSDK_1.0_Getting_Started_Guide
processors.wiki.ti.com/.../C6472

Depends on the SW1, the IP address mode get selected.
If SW1:OFF then IP address will be assigned statically, if SW1:ON then IP address will get assigned from DHCP server.

How you are running the code i.e. static or DHCP ?

Please let me know if any help.

0 Naveen4u over 8 years ago in reply to Titusrathinaraj Stalin

Intellectual 520 points

Kindly help me to start with this kit to run some peripheral applications.

thank you,

0 Titusrathinaraj Stalin over 8 years ago in reply to Naveen4u

TI__Guru** 116100 points

Dear Naveen,

Please install MCSDK for C64x multicore and run the examples.

PDK projects:
C:\ti\pdk_c64x_1_00_00_06\packages\ti\csl\c6472\csl_c6472\example

Demo code:
C:\ti\mcsdk_1_00_00_08\demos\evmc6472\hpdspua

Processors

Processors forum

RE: Not able to Start with the TMDSEVM6472LE new kit With CCSv4.