Hi,
I want to used AIF2 interface on board C6670.
I can't find the non-lookback example on CSL file.
I wanted to send control message on z.16.0.
Can you support the example code?
Thank you.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I want to used AIF2 interface on board C6670.
I can't find the non-lookback example on CSL file.
I wanted to send control message on z.16.0.
Can you support the example code?
Thank you.
Hey Travis,
Has the MCSDK been released? Are there any example projects available for AIF and especially LLDs of AIF.
Regards,
ilke
Hi Ilke,
I confirmed that it will be released as part of MCSDK v2.0.7 in roughly 2weeks.
Regards,
Travis
Ilke,
Check out the release at: http://software-dl.ti.com/sdoemb/sdoemb_public_sw/bios_mcsdk/latest/index_FDS.html
Regards,
Travis
Just a note, the AIF2 tests in the LLD support non-loopback mode on a dual EVM6670 setup. It requires a CI break-out card:
https://estore.ti.com/CI2EVMBOC--P2685.aspx
The release notes in the LLD describe how to set up the HW for board2board tests.
Regards,
Travis
Hi Travis,
Thank you for your reply.
I want to used CPRI to slave, how can I cahnge the code?
Please take a look at the pdk_C6670_1_0_0_19\packages\ti\drv\aif2\docs\AIF2-c6670_usersguide.pdf section 3.1.2. It talks about the test examples/application needing to set some of these parameters, which it details.
Travis