Must a customer use CDCE62005 if they are not using PCI, SRIO, and MCM/hyperlink? How are those pins handled? No connect or tied high/low/Gnd?
They do require ENET, does this mean they need the shared clock with SRIO?
Given above subset of interfaces to be used, is there a simpler/smaller clock we recommend? Do they need jitter cleaning?
The use of the CDCE62005 is not required but it does meet the jitter specification for C6657. If the customer is using the Ethernet interface they will still need clocks for the CORECLK, the DDRCLK and the SRIOSGMIICLK. The later is used by the Ethernet interface and must be present. While I know of a two output clock generator in the same family as the CDCE62005, I am not familiar with a three output version of the device. If they pick a different device they will have to compare the jitter with the requirements provided in the hardware design guide. The clocks must meet these specifications for proper operation.
If you need more help, please reply back. If your question is answered, please click Verify Answer
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.