helo everyone
I want to know how to set a ISR_gpro4 to GPIO_4. Whent there is a falling edge on the GPIO_4, 6678DSP can automatically execute my function ISR_gpro4 .Can you give me an example ? thank you .
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
helo everyone
I want to know how to set a ISR_gpro4 to GPIO_4. Whent there is a falling edge on the GPIO_4, 6678DSP can automatically execute my function ISR_gpro4 .Can you give me an example ? thank you .
Hi Jian,
Please find the GPIO Interrupt example in below post.
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/171824/627981.aspx#627981
Also refer the below discussions about the GPIO interrupt.
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/323009.aspx
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/160712.aspx
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/215247.aspx
Thank you.