This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Getting "Fault" message while obtaining the IP address of DSP board

Hello Team,

I got TI DSP board C6657LS and I am not able to obtain the IP of the board. Please refer to below screen shot

Please help me out to correct the issue, for your information I am following the steps mentioned in the Quick Setup Guide (using USB & LAN cables). Appreciate your help on this is issue.

Thanks.

Sanjeev Kumar

  • Hi Sanjeev,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com).

    Not able to see the screen shot. 

    Please use the MCSDK 2.x released for Keystone I devices and run the examples and demos. Please re-flash the images using program evm section. Please find the MCSDK download and User Guide links below.

    Thank you.

  • Sanjeev Kumar,

    If you are running an example code through CCS and Emulator, refer the below wiki and follow the setups,
    http://processors.wiki.ti.com/index.php/BIOS_MCSDK_2.0_Getting_Started_Guide#Use_JTAG_to_Load_the_Application
    If you are running the demo application from flash, see the below wiki,
    http://processors.wiki.ti.com/index.php/BIOS_MCSDK_2.0_Getting_Started_Guide#Running_the_Demonstration_Application
    Refer the below wiki, to setup the EVM for boot mode,
    http://processors.wiki.ti.com/index.php/TMDSEVM6657L_EVM_Hardware_Setup

    Please post your issue in detailed if you are getting still.