Hello,
I tried to update FPGA firmware in C6657EVM.
But, the log stoped during processing, and I could NOT see the message "Verify successful! 0".
Question:
- I encountered this trouble in our new EVM.
I would like to clarify what is wrong in our methods.
Could you check following sequence?
a. I followed the document by url below :
EVM FPGA UPDATE File(FPGA_Update.zip)
https://www.einfochips.com/index.php/partnerships/texas-instruments/tms320c6657-evm.html#5-resources
b. Here is my log and environment:
C6657-EVM DipSW configuration:
Log during firmware update (log stoped during processing) :
c. I wait for 2 hours. But, it can not finished.
(There is description it takes 3 to 5 minuts to update firmware in the document.)
d. I updated FPGA firmware again.
It takes about 10 seconds(too short), and message displays "Verify successful! 0".
But, it does not seem to succeed compared with other EVM.
Best regards,
Ryutaroh Yoshida