EDMA3 setup for C6678 PCIe

murad qahwash

Genius 3770 points

Can someone please tell me what is wrong with my edma setup described in the following post:

Regards,

Murad

over 9 years ago

0 Raja over 9 years ago

TI__Guru* 81335 points

Hi Murad,
We are woring on your query. You will get the response to the pointed thread. Thank you for your patience.

0 murad qahwash over 9 years ago in reply to Raja

Genius 3770 points

Thank you Rajasekaran,
I am updating my thread with new results. Please take a look at it when you have a chance.

Regards,

Murad

0 murad qahwash over 9 years ago in reply to murad qahwash

Genius 3770 points

Hello Rajasekaran,
Any updates...I tried everything and no luck. Please see my updates for the above thread...

0 Pubesh over 9 years ago in reply to murad qahwash

TI__Mastermind 20790 points

Murad,

I hope, the similar issue you created and discussion is going on the below E2E thread.
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/387481/1379737#1379737
You and Dmitry had more discussion for the EDMA configuration and I believe that, it could be helped to solve your issue. However, this thread and your original thread will be useful for the future readers, if they are getting similar issue.

Processors

Processors forum

EDMA3 setup for C6678 PCIe