lwip on amc2c6670

user4094083

Intellectual 300 points

I want to use lwip on amc2c6670 to transimit data to DSP through ethernet interface.

Is this possible?I have read the lwip docs but I don't know how to config DSP.

Any suggestions? Thank you so much.

over 8 years ago

0 Raja over 8 years ago

TI__Guru* 81335 points

I don't think we ever tried to integrate lwIP to TI-RTOS as TI-RTOS has its own TCP/IP stack.

Is there a reason that you want to use lwIP instead of TI-RTOS's TCP/IP stack(NDK) ?

Thank you.

0 user4094083 over 8 years ago in reply to Raja

Intellectual 300 points

Hi,Raja.Thank you for the reply.
That's because the project we use is not based on TI RTOS.Now We want to transimit data via ethernet.
Thanks.

0 Raja over 8 years ago in reply to user4094083

TI__Guru* 81335 points

From my understanding, you can use lwip however it may not be a straight forward task. Please find my understanding below.

The MCSDK has peripheral driver and example on PDK. Also it has the network transport driver which will be used by NDK for ethernet transport.

Peripheral Driver: C:\ti\pdk_C6670_x_x_x_x\packages\ti\drv\pa
Transport Driver: C:\ti\pdk_C6670_x_x_x_x\packages\ti\transport\ndk\nimu

You may need to implement such a drivers to support lwip on C6670.

Thank you.

0 user4094083 over 8 years ago in reply to Raja

Intellectual 300 points

Thanks for that.

Processors

Processors forum

lwip on amc2c6670