TMS320C6678: What are possible causes for TSIP Tx Error Code 0x10 to occur?

j-breeze

Part Number: TMS320C6678

Hi Champs,

Acoording to the TSIP U/G, the tx error code indicates that CIDF dose not match CIDA.
So, could you please let me clarify what possible causes for the mismatch to occur are?

Best regards,
j-breeze

over 6 years ago

0 Yordan Kovachev over 6 years ago

TI__Guru**** 161600 points

Hi,

I've notified the sw team. Their feedback will be posted here.

Best Regards,
Yordan

0 lding over 6 years ago in reply to Yordan Kovachev

TI__Guru* 95265 points

Hi,

This is explained in UG: Error Code = 0x10. This code indicates that the configuration identity in the
transferred frame data does not match the configuration identity in the active
context. The additional information is the current (active) channel configuration
ID (CIDA) and the transferred frame data channel configuration ID (CIDF).

Regards, Eric

0 j-breeze over 6 years ago in reply to lding

Mastermind 7560 points

Hi,

I'm not sure what the case of that mismatch happening is.
Could you please explain in a bit more detail?

Regards,
j-breeze

0 j-breeze over 6 years ago in reply to j-breeze

Mastermind 7560 points

Hi,

Any information? I'd like to know the cases that the mismatch will happen.
I'm sorry to rush you, but I'd like to get the information ASAP.

Regards,
j-breeze

0 j-breeze over 6 years ago in reply to j-breeze

Mastermind 7560 points

Hi,

Dose anyone help me?

I've already read the UG and I understand that the error code indicates the mismatch. But I'm not sure why the mismatch occurs.
Is there any case that CID is changed during frame transmission, not on the next superframe synchronization event?

Regards,
j-breeze

0 j-breeze over 6 years ago in reply to j-breeze

Mastermind 7560 points

I need TI support. Could you please get back to me as soon as possible. Regards, j-breeze

0 j-breeze over 6 years ago in reply to j-breeze

Mastermind 7560 points

Hi Eric, I'm still expecting your reply. Could you please let me know the current status regarding my inquiry about TSIP error code? Regards, j-breeze

0 Michael Line over 6 years ago

TI__Prodigy 50 points

This happens when hardware detects that the CID value written by the software driver does not match the currently active CID value. This can happen if an attempt to change the channel maps is not correctly in sync with the hardware. Changing contexts (to update the channel map) must be done on a super frame boundary.

Processors

Processors forum

TMS320C6678: What are possible causes for TSIP Tx Error Code 0x10 to occur?