CCS/66AK2H14: CCS/66AK2H14

mahima shanbag

Part Number: 66AK2H14

Tool/software: Code Composer Studio

Hi,

I am using 66ak2h14 processor and CCSV7.2.

How to build C:\ti\pdk_k2hk_4_0_7\packages\ti\boot\writer\nand\src\nandwriter.c example, Because It cannot be imported in CCS like other PDK examples.

Please help me with this.

Thank you,

Mahima shanbag

over 6 years ago

0 Rahul Prabhu over 6 years ago

TI__Guru** 114410 points

Mahima,

Currently, in Processor SDK RTOS for this device, we only support SPI boot and flash writer as indicated here:
processors.wiki.ti.com/.../L

The flash writer is there in the package as reference code, as it has been carried over from MCSDK 3.x where these writers were supported. The writers have dependency on legacy platform library.
processors.wiki.ti.com/.../MCSDK_UG_Chapter_Exploring

If you wish to use this writer, we recommend that you use the legacy MCSDK 3.x for this functionality.

Regards,
Rahul

0 mahima shanbag over 6 years ago in reply to Rahul Prabhu

Expert 1585 points

Hi Rahul,
Thank you for your quick reply.
I am not using NAND for booting purpose. I just need to test read and write functionality.

Regards,
Mahima Shanbag

0 Rahul Prabhu over 6 years ago in reply to mahima shanbag

TI__Guru** 114410 points

In Processor SDK RTOS, the build is make file based and not CCS based. you can cd into location where the makefile is and invoke the build using make utility.

cd pdk_k2hk_4_0_8\packages\ti\boot\writer\nand\evmk2h\build

gmake clean

gmake all

Processors

Processors forum

CCS/66AK2H14: CCS/66AK2H14