• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 101 subscribers
  • Views 415 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

66AK2G02: Maximum Current Ratings at Power Terminal in PET

Naoki Kawada
Guru 19890 points
Part Number: 66AK2G02

Hi,

Here is a snippet from PET for K2G:

As you see, SUPPLY NAME lists multiple pins. However, only a single number is provided as MAX value for them. At this point, my understanding is that the value is regarded as *sum* for these multiple pins. Could you please correct me if I`m wrong ?

Best Regards,
NK

  • 0
    TI__Guru**** 161600 points

    Hi Naoki,

    See the document 66AK2G02 Power Estimation Tool (sprac81.pdf), Section 2.4 66AK2G02 Power Consumption:
    "The report lists power supply name, voltage in V, current in mA and power consumption in mW per power rail groups. The total power consumption in mW is listed at the end of the table."

    So yes, the supply name field is a power rail group. The current consumption of this power rail is listed in the right column of the table.

    Best Regards,
    Yordan

  • 0 in reply to Yordan Kovachev
    Guru 19890 points
    Thanks, Yodan. This answers to my customer's question. I close the thread.

    Naoki