Hi all,
We have got our own customised DM368IPNC hardware.I have a doubt that whether we can use the DM368IPNC Hardware
with any of the sensor board types(we want to test Sony IMX036 or Aptina MT9P031).I want to know that if the DM368IPNC hardware
that works well with say Sony sensor can work well if we use it with Aptina MT9P031 sensor without making any changes in hardware.
I know that ipnc software will differ depending on the sensor board type we use but will any hardware changes be required also on change
in sensor board.
Thanks and Regards,
Mayank
Hi Mayank,
I know that Sony and Omnivision Appro sensor boards are exchangable, but Aptina MT-5 has different fpc connector.
Regards.
For DM36x IPNC, it has two different types of interface, one is 30-pin ZIP connector for P031, and another one is 36-pin ZIP connector for Sony IMX036.Currently all camera boards have standard 36-pin ZIP connector interface, but there is an adapter board which can convert 36 to 30-in to support DM36x IPNC MT5 model.Here is the part nunmber for this adapter: LI-30PINADAPTER, https://www.leopardimaging.com/LI-CAM_Camera_Boards.html It is provided by Leopard Imaging.