TI E2E Community
Digital Signal Processors (DSP)
DaVinci™ Video Processors
DM3x DaVinci Video Processor Forum
DM365 EVM component video display problem
I m not able to get the video output on my TV using the dvsdkdemo. As per the demo, i should be getting an image of a remote control on the screen. I do get the image but it is not stil image i.e. the video keeps winding over the screen. Attaching a screenshot:
Looks like some timing/resolution issue.
Default LSP that comes with EVM version version 2.10 ... MVL based LSP
Using a normal analog CRT TV connected using COMPONENT interface. I m assuming that i can connect non-HD TV to the component output.
Default mode of 480P-60 was giving lot of flicker ... after changing it to 576P-50 ... the flicker was reduced as shown above in the img.
I ve tried using composite cable as well with same result. Tried NTSC and PAL options as well (by using relevant bootargs).
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.