E2E visitors, Feel free to checkout these valuable resource websites for DM36X and DM35X processors. They include a wide variety of helpful wikis that can help resolve many of the questions that you might be facing in your development phase using these devices from the Davinci Family of Products.
For DM36X resources please visit: http://processors.wiki.ti.com/index.php/Category:DM365
For DM35x resources please visit: http://processors.wiki.ti.com/index.php/Category:DM355
PS: Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!
We are using the BT656 interface. Using the same (linux) driver a PAL camera works and an NTSC camera does not. The NTSC image is broken into 2 pieces vertically each shifted by a different amount horizontally with a gap between them. Our question: Is there any register setting in the VPFE or anywhere else in the device that sets the BT656 input to PAL or NTSC?