Design Digital Video Camera

Daniel Coutts

Other Parts Discussed in Thread: DM3730

Hi there

I'm looking developing a digital video or still camera for my BEng dissertation project. This will also be part as a development for use within the company which i work for (replace our current camera 30+).

As i have no real hands on experience electronic boards (only know how to look for faults and swooping out) i was wondering if you do a development pack of some sort.

What i want to do is start of small then add on each section individually:

video process to a composite output
add auto white balance
add auto focus
add zoom
add recorded footage .ect

Your help would be much appreciated

Regards

Daniel

over 10 years ago

0 Cvetolin Shulev-XID over 10 years ago

TI__Guru 65405 points

Hi Daniel,

The main purpose of the E2E support forum is to provides guideline and helps solving some issues of the forum participants. There I could suggest you some links to documentation and articles which could guide you to realize your aims.

You can start with reading the Technical Reference manual section 6.4 Camera ISP Functional Description. The TRM could be downloaded at dm3730 product page after registration:

http://www.ti.com/product/dm3730

Also you can obtain some practical knowledges about camera ISP driver from the linked article:

http://omappedia.org/wiki/Camera-ISP_Driver

Tsvetolin Shulev

0 Daniel Coutts over 10 years ago in reply to Cvetolin Shulev-XID

Prodigy 20 points

Cvetolin

Thanks for getting back to me. I will have a look that what you have suggested and see if will point me on the right track for what i'm after.

Thanks again

Daniel

Processors

Processors forum

Design Digital Video Camera