About lpm

Qing Chang

Intellectual 280 points

Other Parts Discussed in Thread: DM3730

Hi！

My environment is dvsdk_dm3730_4_02, and I can find the lpm.ko after "make lpm" under corresponding directory.

But I have no Idea of building the codec and server, and there even isn't a helpful makefile presented. I'm so fuzzy.

Could you please give me some advice?

Best regards :)

over 9 years ago

0 Cvetolin Shulev-XID over 9 years ago

TI__Guru 65405 points

Hi Qing Chang,

If you have successfully built the lpm.ko the path should be ($PKG/lib/MVLinux/release/link/lpm.ko). For more details read the document at the following link:

http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/lpm/1_24_03_11/exports/local_power_manager_linux_1_24_03_11/packages/ti/bios/power/src/doc/overview.txt

Tsvetolin Shulev

0 Qing Chang over 9 years ago in reply to Cvetolin Shulev-XID

Intellectual 280 points

Hi Tsvetolin Shulev

Please let me know whether/how I can rebuild the lib* related to the lpm.

Thanks:)

0 Cvetolin Shulev-XID over 9 years ago in reply to Qing Chang

TI__Guru 65405 points

Hi Qing Chang,

I suggest you a article about building LPM modules step by step at the link below:

http://ossie.wireless.vt.edu/trac/wiki/BeagleBoard_DSPLink

I think the described version is older then the version that you are using therefore you should pay attention on the folder names which contain kernel version and change it according your kernel version.

Tsvetolin Shulev

Processors

Processors forum

About lpm