Forums

HW:DM8168

SW:EZSDK5.3.1.15

why decode_display_a8host_debug.xv5T block when output to ypbpr display? But the hdmi output  is OK!

root@dm816x-evm:/home# ./decode_display_a8host_debug.xv5T  -i 1080P_HP.h264 -w 1
920 -h 1080 -f 60 -g 0 -d 1 -c h264
input file: 1080P_HP.h264
width: 1920
height: 1080
frame_rate: 60
gfx: fbdev disable
codec: h264
display_id: 1
 Decoder-Display example 
===============================
 OMX_Init completed 
 UIAClient is ready to send a UIA configuration command
UIAClient received UIA_CONFIGURE_ACK
UIAClient is done sending requests
UIAClient is ready to send a UIA configuration command
UIAClient received UIA_CONFIGURE_ACK
UIAClient is done sending requests
 opening file 
 decoder compoenent is created 
PADX: 32 PADY: 24
 level set is 12 
 scalar compoenent is created 
set input port params (width = 1920, height = 1080) 
set output port params (width = 1920, height = 1080) 
set number of channels 
set input resolution 
set output resolution 
enable scalar input port 
got eventEnable/Disable Event 
enable scalar output port 
got eventEnable/Disable Event 
found handle 0x13af58 for component OMX.TI.VPSSM3.VFDC 
 got display handle 
found handle 0x13ea60 for component OMX.TI.VPSSM3.CTRL.DC
Buffer Size computed: 4147200
set input port params (width = 1920, height = 1080) 
setting input and output memory type to default
enable input port 
got eventEnable/Disable Event 
 connect call for decoder-scalar 
  connect call for scalar-display 
  decoder inport buffers allocated 
  decoder outport buffers allocated 
 got eventState changed to: OMX_StateIdle 
 state IDLE 
  Scalar input port use buffer done 
  scalar outport buffers allocated 
 got eventState changed to: OMX_StateIdle 
 scalar state IDLE