TI E2E Community
Digital Signal Processors (DSP)
DaVinci™ Video Processors
DM816x, C6A816x and AM389x Processors Forum
AM389x DM814x DCAN Driver Config in EZSDK
DM8148 EVM by Mistral; EZSDK 5.03.01.15
Issue: BoshD_can driver isn't in my ezsdk 5.03.01.15 - how do I configure the DCAN driver?
Attempted to configure the DCAN driver using the instructions here: http://processors.wiki.ti.com/index.php/Sitara_DCAN_Driver_Guide;
The ezdsk I have has the following options in it but no The Bosh D_Can driver
│ │ --- CAN bus subsystem support │ │
│ │ <*> Raw CAN Protocol (raw access with CAN-ID filtering) │ │
│ │ <*> Broadcast Manager CAN Protocol (with content filtering) │ │
│ │ CAN Device Drivers --->
│ │ < > Virtual Local CAN Interface (vcan) │ │
│ │ <*> Platform CAN drivers with Netlink support │ │
│ │ [ ] CAN bit-timing calculation │ │
│ │ < > Microchip MCP251x SPI CAN controllers │ │
│ │ < > PCH CAN │ │
│ │ < > Philips/NXP SJA1000 devices ---> │ │
│ │ CAN USB interfaces ---> │ │
│ │ [ ] CAN devices debugging messages │ │
│ │ │ │
how do I configure the DCAN driver?
What is the PSP version you are using?
Please mark this Forum post as answered via the Verify Answer button below if it helps answer your question. Thanks!
The EZSDK 5.03.01.15 comes with
PSP04.01.00.06 release doesn't support D_CAN, D_CAN is included in PSP04.04.00.01. I think you have to wait for eZSDK release with PSP04.04.00.01.
Meanwhile you can pick-up the D_CAN related patches from ARAGO tree and apply on your PSP release, so that you can test D_CAN.
patches under "Anil Kumar Ch"
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.