Forums

v4l2 Gstreamer error ( gst_v4l2sink_sync_rotation: assertion `v4l2_ioctl )

This question is answered

Posted by P W

on Jun 04 2012 13:34 PM

I think I finally initialized V4L2 Capture driver on my DM816-EVM.

Next thing I want to do is to capture the video from DVI output of the video card(Geforce 7600 GT) of my second PC, and encode it with h264 codec using Gstreamer. The output from the second PC is connected to VIP(Video input VGA port on daughter card). I wanted to see the preview video on my screen first. But when I tried different Gstreamer pipelines, I got some error messages as shown below. Could you explain what would be the reason for this? I am using SD card boot (built from SDK 5.04). I have to finish this by this week. Any your replies would be much appreciated.

U-Boot 2010.06 (Apr 29 2012 - 20:35:23)

DRAM: 2 GiB
MMC:   OMAP SD/MMC: 0
Using default environment

Hit any key to stop autoboot: 0
raise: Signal # 8 caught
reading u-boot.bin

210312 bytes read
## Starting application at 0x80800000 ...

U-Boot 2010.06 (Apr 29 2012 - 20:28:20)

TI8168-GP rev 1.1

ARM clk: 987MHz
DDR clk: 796MHz

I2C:   ready
DRAM: 2 GiB
NAND: HW ECC BCH8 Selected
No NAND device found!!!
0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - bad CRC or NAND, using default environment

:,;;:;:;;;;;;;;r;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:;;;;;;;;:,;;:;:
;,;:::;;;;r;;;rssiSiS552X5252525259GX2X9hX9X9XX2325S55252i5:,;;:;:;;;;;;;;:,;;:
;:;;;;;;;rrssSsS52S22h52299GGAAMHMM#BBH#B#HMM#HMBA&&XX2255S2S5Si:,;;:;:;;;;;;;;
;:;;r;;rsrrriiXS5S329&A&MH#BMB#A&9XXA252GXiSXX39AAMMMBB&G22S5i2SSiiiisi:,;;:;:;
;;;;;r;rr2iisiih393HB#B#AA99i22irrrX3X52AGsisss2Xii2299HBMA&X2S5S5iSiisSsi:,;;:
r:r;rrsrsihXSi2&##MHB&Ahh3AGHGA9G9h&#H##@@@##MAMMXXX9SSS29&&HGGX2i5iisiiisisi:,
;;rrrrsSiiiA&ABH&A9GAGhAhBAMHA9HM@@@@@@@@@@@@@@@@@@@HHhAh2S2SX9&Gh22SSiisiiisii
r:rrssisiS2XM##&h3AGAX&3GG3Ssr5H@M#HM2; ;2X&&&MHMB###GBB#B&XXSSs529XX55iSsisisi
r;rsrisSi2XHAhX99A3XXG&&XS;:,rH#HGhAS   @@@@3rs2XBM@@A552&&AHA2XiisSS252SSsisSs
r;issi5S22&&3iSSX292&hXsr;;:;h@&G339&S9@@@@2@MA&9&HB##Xris29ABMAAX2ir;rsSi5iss5
rrsSi2XhG&9GXh399&X99i;;;;;;r#H&293H9X#@@@@@@@B&9GhAH@XrrsrsiXABHB&HG2rr;rrSiSi
;:rsisS599&AA9XG&3A35r;:::;,;BMh&&2iX5A@@@@@@@&392X5GB2;;;r;iSX393A##A&Xi:::rsi
;:rss552222X553&XHMhir;;::,:,h#HhGSXhG3#@@@@#AXXS2XAHA;::;;;;ss55XShBA3239r:,;;
r;ii2S5SSi2i53hirsh2srr::,,,,;MMXX359&Ah3h&Si59SX99A#i:,::::;;sri2,.2r;:SGAr;,:
;:;rrrrssiriXGSi::shs;;;,,,:,,rBBA9h5s5h5iS5isi2SAHB5:,,,:::;rrs5&SrisSX5Srrr:,
;,r;;;;rsriSSrrrr;;5Xrr;;,:,,.,;9AA2SsisS5323XXXG9&i:.,,::;;r;;;srrrrrr;;:;::::
:,;r;r;rrissrrr;:;::;s;;;;,:,,..,r293h222hXXAAGGGX;:,,,:,:,::;:;::,:,,,,...,,,,
;,;;;;rrrrrrrrirr;,.,,:::::::,,,,.,;SX&ABAB2hhXir:,,.,,.,,:,,,,..,,,..,..,,,..:
:.:;:;;;:;;;;r;rrs;:.. ,,:::::,:,:,,.::rrsrr;;,,.......,..,....,,,,,,,...,.,,:,
:.:::,::::::;;r;rrr;:.......,.,.,,:::,,...............,,::.,,,,:,::,,:,:,,,:,;:
,.::,:,,,,,;;;;;;;;r;;::,..............................;;;:;::::,:::::::,:,:,,,
: ,,:,,,,,,,,,,,,,:;rrr;;:;,,,,,,,::,.,.:.,.,;s,:;;;;:;:;;;;;::::,:::,:::,:,:,:
,.,,,,,,,...,,.,,....................................:,............:,,,:,:,,,,,

Net:   <ethaddr> not set. Reading from E-fuse
Detected MACID:90:d7:eb:20:2f:f2
Ethernet PHY: GENERIC @ 0x01
DaVinci EMAC
Hit any key to stop autoboot: 0
raise: Signal # 8 caught
reading boot.scr

336 bytes read
Running bootscript from MMC/SD to set the ENV...
## Executing script at 80900000
reading ti_logo.bmp

151674 bytes read
reading uImage

2563448 bytes read
## Booting kernel from Legacy Image at 80009000 ...
   Image Name:   Arago/2.6.37-psp04.04.00.01/dm81
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2563384 Bytes = 2.4 MiB
   Load Address: 80008000
   Entry Point: 80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.37 (x0029463@swubn01) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 Sun Apr 29 20:16:23 IST 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ti8168evm
reserved size = 52428800 at 0x0
FB: Reserving 52428800 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
OMAP chip is TI8168 1.1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 79656
Kernel command line: console=ttyO2,115200n8 rootwait root=/dev/mmcblk0p2 rw mem=364M@0x80000000 324M@0x9F900000 notifyk.vpssm3_sva=d
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 314MB = 314MB total
Memory: 312700k/312700k available, 60036k reserved, 0K highmem
Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xd7000000 - 0xf8000000   ( 528 MB)
    lowmem : 0xc0000000 - 0xd6c00000   ( 364 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   ( 14 MB)
      .init : 0xc0008000 - 0xc003b000   ( 204 kB)
      .text : 0xc003b000 - 0xc04d8000   (4724 kB)
      .data : 0xc04d8000 - 0xc0520f00   ( 292 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:407
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Total of 128 interrupts on 1 active controller
GPMC revision 6.0
Trying to install interrupt handler for IRQ400
Trying to install interrupt handler for IRQ401
Trying to install interrupt handler for IRQ402
Trying to install interrupt handler for IRQ403
Trying to install interrupt handler for IRQ404
Trying to install interrupt handler for IRQ405
Trying to install interrupt handler for IRQ406
Trying to install type control for IRQ407
Trying to set irq flags for IRQ407
OMAP clockevent source: GPTIMER1 at 27000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
omap_voltage_early_init: voltage driver support not added
regulator: core version 0.5
regulator: dummy:
NET: Registered protocol family 16
omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
omap_voltage_add_dev: VDD specified does not exist!
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
omap_mux_init: Add partition: #1: core, flags: 0
_omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
_omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
NOR: Can't request GPMC CS
registered ti816x_gpio_vr device
registered ti816x_sr device
pm_dbg_init: only OMAP3 supported
registered ti81xx_vpss device
registered ti81xx_vidout device
registered ti81xx on-chip HDMI device
registered ti81xx_fb device
registered ti81xx_vin device
ti81xx_pcie: Invoking PCI BIOS...
ti81xx_pcie: Setting up Host Controller...
ti81xx_pcie: Register base mapped @0xd7020000
ti81xx_pcie: Starting PCI scan...
PCI: bus0: Fast back to back transfers enabled
bio: create slab <bio-0> at 0
regulator: VFB: 800 <--> 1025 mV at 1010 mV
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USBSS revision 4ea20808
registerd cppi-dma Intr @ IRQ 17
Cppi41 Init Done
omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource gp timer
musb-hdrc: version 6.0, host, debug=0
musb-hdrc musb-hdrc.0: dma type: dma-cppi41
MUSB controller-0 revision 4ea20800
musb-hdrc: kernel must blacklist external hubs
musb-hdrc musb-hdrc.0: MUSB HDRC host driver
musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: MUSB HDRC host driver
usb usb1: Manufacturer: Linux 2.6.37 musb-hcd
usb usb1: SerialNumber: musb-hdrc.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
musb-hdrc musb-hdrc.0: USB Host mode controller at d701e000 using DMA, IRQ 18
musb-hdrc musb-hdrc.1: dma type: dma-cppi41
MUSB controller-1 revision 4ea20800
musb-hdrc: kernel must blacklist external hubs
musb-hdrc musb-hdrc.1: MUSB HDRC host driver
musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: MUSB HDRC host driver
usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
usb usb2: SerialNumber: musb-hdrc.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
musb-hdrc musb-hdrc.1: USB Host mode controller at d7026800 using DMA, IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
PMU: registered new PMU device of type 0
omap-iommu omap-iommu.0: ducati registered
omap-iommu omap-iommu.1: sys registered
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 610
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
console [ttyO2] enabled
brd: module loaded
loop: module loaded
ahci ahci.0: forcing PORTS_IMPL to 0x3
ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16
ata2: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x180 irq 16
m25p80 spi1.0: found m25p05-nonjedec, expected m25p80
m25p80 spi1.0: m25p05-nonjedec (64 Kbytes)
Creating 4 MTD partitions on "spi_flash":
0x000000000000-0x000000040000 : "U-Boot"
mtd: partition "U-Boot" extends beyond the end of device "spi_flash" -- size truncated to 0x10000
0x000000010000-0x000000012000 : "U-Boot Env"
mtd: partition "U-Boot Env" is out of reach -- disabled
0x000000000000-0x000000280000 : "Kernel"
mtd: partition "Kernel" extends beyond the end of device "spi_flash" -- size truncated to 0x10000
0x000000010000-0x000000010000 : "File System"
mtd: partition "File System" is out of reach -- disabled
omap2-nand driver initializing
No NAND device found.
No NAND device found.
davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
davinci_mdio davinci_mdio.0: detected phy mask fffffff9
davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown
davinci_mdio davinci_mdio.0: phy[2]: device 0:02, driver unknown
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
notify_init : notify drivercreated for remote proc id 2 at physical Address 0xbf900000
usbcore: registered new interface driver snd-usb-audio
asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok
ALSA device list:
#0: TI81XX EVM
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
omap_voltage_late_init: Voltage driver support not added
Power Management for TI81XX.
smartreflex smartreflex: Driver initialized
omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
usb 1-1: new low speed USB device using musb-hdrc and address 2
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 00000 7.51 GiB
mmcblk0: p1 p2
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
EXT3-fs: barriers not enabled
usb 1-1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB OPTICAL MOUSE
usb 1-1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1:1.0/input/input0
generic-usb 0003:093A:2510.0001: input: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-musb-hdrc.0-1/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): recovery complete
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 204K
INIT: version 2.86 booting
Please wait: booting...
Error opening /dev/fb0: No such file or directory
Starting udev
udevd (74): /proc/74/oom_adj is deprecated, please use /proc/74/oom_score_adj instead.
Remounting root file system...
Caching udev devnodes
NET: Registered protocol family 10
ALSA: Restoring mixer settings...
No state is present for card EVM
Found hardware: "" "" "" "" ""
Hardware is initialized using a generic method
No state is present for card EVM
Configuring network interfaces... davinci_mdio davinci_mdio.0: resetting idled controller
net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=282f014)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.13.2) started
Sending discover...
PHY: 0:01 - Link is Up - 1000/Full
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 192.168.42.23...
Lease of 192.168.42.23 obtained, lease time 3600
adding dns 192.168.1.52
adding dns 192.168.1.50
done.
Setting up IP spoofing protection: rp_filter.
Sun Apr 29 22:50:00 UTC 2012
INIT: Entering runlevel: 5
Loading HDVICP2 Firmware
DM816X prcm_config_app version: 2.0.0.1
Doing PRCM settings...
        PRCM for IVHD0 is in Progress, Please wait.....
                        BW Phy Addr : 0x48180600 Data : 0x00000002
                        AW Phy Addr : 0x48180600 Data : 0x00000002
                        Phy Addr : 0x48180c04 Data : 0x00000037
                        BW Phy Addr : 0x48180620 Data : 0x00070000
                        AW Phy Addr : 0x48180620 Data : 0x00070002
                        BW Phy Addr : 0x48180624 Data : 0x00030000
                        AW Phy Addr : 0x48180624 Data : 0x00010002
                        Phy Addr : 0x48180600 Data : 0x00000102
                        BW Phy Addr : 0x48180c10 Data : 0x00000007
                        AW Phy Addr : 0x48180c10 Data : 0x00000003
                        Phy Addr : 0x48180c14 Data : 0x00000004
                        BW Phy Addr : 0x58088000 Data : 0xeafffffe
                        AW Phy Addr : 0x58088000 Data : 0xeafffffe
                        BW Phy Addr : 0x58098000 Data : 0xeafffffe
                        AW Phy Addr : 0x58098000 Data : 0xeafffffe
                        BW Phy Addr : 0x48180c10 Data : 0x00000003
                        AW Phy Addr : 0x48180c10 Data : 0x00000000
                        Phy Addr : 0x48180c14 Data : 0x00000007
        PRCM for IVHD0 is Done Successfully
        PRCM for IVHD1 is in Progress, Please wait.....
                        BW Phy Addr : 0x48180700 Data : 0x00000002
                        AW Phy Addr : 0x48180700 Data : 0x00000002
                        Phy Addr : 0x48180d04 Data : 0x00000037
                        BW Phy Addr : 0x48180720 Data : 0x00070000
                        AW Phy Addr : 0x48180720 Data : 0x00050002
                        BW Phy Addr : 0x48180724 Data : 0x00030000
                        AW Phy Addr : 0x48180724 Data : 0x00010002
                        Phy Addr : 0x48180700 Data : 0x00000102
                        BW Phy Addr : 0x48180d10 Data : 0x00000007
                        AW Phy Addr : 0x48180d10 Data : 0x00000003
                        Phy Addr : 0x48180d14 Data : 0x00000004
                        BW Phy Addr : 0x5a088000 Data : 0xeafffffe
                        AW Phy Addr : 0x5a088000 Data : 0xeafffffe
                        BW Phy Addr : 0x5a098000 Data : 0xeafffffe
                        AW Phy Addr : 0x5a098000 Data : 0xeafffffe
                        BW Phy Addr : 0x48180d10 Data : 0x00000003
                        AW Phy Addr : 0x48180d10 Data : 0x00000000
                        Phy Addr : 0x48180d14 Data : 0x00000007
        PRCM for IVHD1 is Done Successfully
        PRCM for IVHD2 is in Progress, Please wait.....
                        BW Phy Addr : 0x48180800 Data : 0x00000002
                        AW Phy Addr : 0x48180800 Data : 0x00000002
                        Phy Addr : 0x48180e04 Data : 0x00000037
                        BW Phy Addr : 0x48180820 Data : 0x00070000
                        AW Phy Addr : 0x48180820 Data : 0x00050002
                        BW Phy Addr : 0x48180824 Data : 0x00030000
                        AW Phy Addr : 0x48180824 Data : 0x00010002
                        Phy Addr : 0x48180800 Data : 0x00000102
                        BW Phy Addr : 0x48180e10 Data : 0x00000007
                        AW Phy Addr : 0x48180e10 Data : 0x00000003
                        Phy Addr : 0x48180e14 Data : 0x00000004
                        BW Phy Addr : 0x53088000 Data : 0xeafffffe
                        AW Phy Addr : 0x53088000 Data : 0xeafffffe
                        BW Phy Addr : 0x53098000 Data : 0xeafffffe
                        AW Phy Addr : 0x53098000 Data : 0xeafffffe
                        BW Phy Addr : 0x48180e10 Data : 0x00000003
                        AW Phy Addr : 0x48180e10 Data : 0x00000000
                        Phy Addr : 0x48180e14 Data : 0x00000007
        PRCM for IVHD2 is Done Successfully
PRCM Initialization completed
SysLink version : 2.10.03.20
SysLink module created on Date:Apr 29 2012 Time:20:45:11
FIRMWARE: I2cInit will be done by M3
FIRMWARE: Memory map bin file not passed
Usage : firmware_loader <Processor Id> <Location of Firmware> <start|stop> [-mmap <memory_map_file>] [-i2c <0|1>]
===Mandatory arguments===
<Processor Id>         0: DSP, 1: Video-M3, 2: Vpss-M3
<Location of Firmware> firmware binary file
<start|stop>           to start/stop the firmware
===Optional arguments===
-mmap                  input memory map bin file name
-i2c                   0: i2c init not done by M3, 1(default): i2c init done by M3
FIRMWARE: isI2cInitRequiredOnM3: 1
FIRMWARE: Default memory configuration is used
MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.2.1
FIRMWARE: Memory Configuration status : In Progress
FIRMWARE: 1 start Successful
Loading HDVPSS (V4L2) Firmware
FIRMWARE: Memory map bin file not passed
Usage : firmware_loader <Processor Id> <Location of Firmware> <start|stop> [-mmap <memory_map_file>] [-i2c <0|1>]
===Mandatory arguments===
<Processor Id>         0: DSP, 1: Video-M3, 2: Vpss-M3
<Location of Firmware> firmware binary file
<start|stop>           to start/stop the firmware
===Optional arguments===
-mmap                  input memory map bin file name
-i2c                   0: i2c init not done by M3, 1(default): i2c init done by M3
FIRMWARE: isI2cInitRequiredOnM3: 0
FIRMWARE: Default memory configuration is used
MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.2.1
FIRMWARE: Memory Configuration status : In Progress
FIRMWARE: 2 start Successful
tvp7002 2-005d: tvp7002 found @ 0x5d (OMAP I2C adapter)
tvp7002 2-005d: Rev. 02 detected.
ti81xxvin ti81xxvin: registered sub device tvp7002
ti81xxvin ti81xxvin: TI81xx HDVPSS Capture driver initialized
HDMI W1 rev 2.0
Starting system message bus: dbus.
Starting telnet daemon.
Starting syslogd/klogd: done
Starting thttpd.
Starting PVR
Starting Matrix GUI application.

_____                    _____           _         _
| _ |___ ___ ___ ___   | _ |___ ___ |_|___ ___| |_
|     | _| .'| . | . | |   __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
              |___|                    |___|

Arago Project http://arago-project.org dm816x-evm ttyO2

Arago 2011.09 dm816x-evm ttyO2

dm816x-evm login: root
root@dm816x-evm:~# ls
root@dm816x-evm:~# lsmod
Module                  Size Used by
bufferclass_ti          4950 0
omaplfb                10794 0
pvrsrvkm              155594 2 bufferclass_ti,omaplfb
ti81xxhdmi             16163 0
ti81xxvin              20388 0
tvp7002                 6405 1
ti81xxvo               21210 0
ti81xxfb               21979 3
vpss                   75009 5 omaplfb,ti81xxhdmi,ti81xxvin,ti81xxvo,ti81xxfb
syslink              1119122 0
ipv6                  209855 12
root@dm816x-evm:~# gst-launch v4l2src always-copy=false queue-size=11 ! 'video/x-raw-yuv-strided,format=(fourcc)YUY2,width=1280,height=720,framerate=(fraction)60/1' ! omxbufferalloc numBuffers=11 ! gstperf ! v4l2sink min-queued-bufs=2
Setting pipeline to PAUSED ...

** (gst-launch-0.10:1377): CRITICAL **: gst_v4l2sink_sync_rotation: assertion `v4l2_ioctl (fd, VIDIOC_S_CTRL, &control) >= 0' failed

** (gst-launch-0.10:1377): CRITICAL **: gst_v4l2sink_sync_rotation: assertion `v4l2_ioctl (fd, VIDIOC_S_CTRL, &control) >= 0' failed

** (gst-launch-0.10:1377): CRITICAL **: gst_v4l2sink_sync_flip: assertion `v4l2_ioctl (fd, VIDIOC_S_CTRL, &control) >= 0' failed

Mode set is 0
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not negotiate format
Additional debug info:
gstbasesrc.c(2778): gst_base_src_start (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
Check your filtered caps, if any
Setting pipeline to NULL ...

!!!!!!!!!unreference all the remaining buffers!!!!!!!!!Freeing pipeline ...
root@dm816x-evm:~# gst-launch v4l2src ! ffmpegcolorspace ! 'video/x-raw-yuv-strided,format=(fourcc)YUY2,width=1280,height=720,framerate=(fraction)30/1' ! omxbufferalloc numBuffers=11 ! gstperf ! v4l2sink min-queued-bufs=2
Setting pipeline to PAUSED ...

** (gst-launch-0.10:1383): CRITICAL **: gst_v4l2sink_sync_rotation: assertion `v4l2_ioctl (fd, VIDIOC_S_CTRL, &control) >= 0' failed

** (gst-launch-0.10:1383): CRITICAL **: gst_v4l2sink_sync_rotation: assertion `v4l2_ioctl (fd, VIDIOC_S_CTRL, &control) >= 0' failed

** (gst-launch-0.10:1383): CRITICAL **: gst_v4l2sink_sync_flip: assertion `v4l2_ioctl (fd, VIDIOC_S_CTRL, &control) >= 0' failed

Mode set is 0
ERROR: Pipeline doesn't want to pause.
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not negotiate format
Additional debug info:
gstbasesrc.c(2778): gst_base_src_start (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
Check your filtered caps, if any
Setting pipeline to NULL ...

!!!!!!!!!unreference all the remaining buffers!!!!!!!!!Freeing pipeline ...
root@dm816x-evm:~#

The first Gstreamer pipeline is from DM81xx Gstreamer Pipelines ( http://processors.wiki.ti.com/index.php/DM81xx_Gstreamer_Pipelines ), and the second pipelines is that I added ffmpegcolorspace to convert from RGB to YUV. What would be the causes of these error messages?

All Replies

Posted by P W

on Jun 04 2012 14:02 PM

Intellectual580 points

I am also wondering if this error is due to any incorrect usage of the pipeline codes or if it has to do with something other than pure pipeline itself like Driver issue or something else. Thank you.

Posted by HardikShah

on Jun 04 2012 23:08 PM

Mastermind20155 points

Hi,

Are you trying to use DVI input or Component in. From the logs its seems input resolution is not getting detected. What is the input resolution you are feeding?

Regards,

Hardik Shah

Regards,

Hardik Shah

Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!

Posted by P W

on Jun 05 2012 02:14 AM

Intellectual580 points

Hi Hardik,

I am feeding DVI output from my graphic card on my PC into Video Input port(VGA) on daughter card. I set the The DVI output resolution is 800 x 600. Is there certain resolution which can be used?

Posted by HardikShah

on Jun 05 2012 02:27 AM

Verified Answer

Verified by P W

Mastermind20155 points

Hi,

VGA input is not supported. Only Y, Pb and Pr inputs are supported.

Regards,

Hardik Shah

Regards,

Hardik Shah

Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!

Posted by P W

on Jun 05 2012 02:38 AM

Intellectual580 points

Hi Hardik.

I am quite surprised that you even replied at this time. Thanks a lot. Hardik.

But did you mean by RGB, not VGA? Since VGA is the video input connector on the daughter board. But I think the output from graphic card should be RGB color space. Hmm. If you meant that RGB is not supported as a video input for EVM, I think I should find other video source to be captured.

Posted by P W

on Jun 05 2012 02:52 AM

Intellectual580 points

Oh Wait. Sorry please ignore the above reply. I was confused with YUV.

Oh I thought VGA port on daughter card is video input port that I can use for capturing video.

But now I can understand why it didn't work... Let me try with Y Pb Pr port tomorrow at work, and verify this posting. Thanks a lot Hardik.

Posted by HardikShah

on Jun 05 2012 02:59 AM

Mastermind20155 points

Hi,

Actually TVP7002 decoder can take RGB in as well as YUV in. RGB in is through VGA port, while YUV is through component in. Right now only component in is supported.

Regards,

Hardik Shah

Regards,

Hardik Shah

Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!

Posted by P W

on Jun 05 2012 15:34 PM

Intellectual580 points

Hi Hardik.

Now it seems working~!! I don't get the same error messages. And I can see like below.

I am not sure what all the messages appeared before "perf0: frames: 63 current: 62.73 average: 62.73 arm-load: 27", but at least it seems doing something.

I will post this as another question. Thanks Hardik~!

PRCM Initialization completed
SysLink version : 2.10.03.20
SysLink module created on Date:Apr 29 2012 Time:20:45:11
FIRMWARE: I2cInit will be done by M3
FIRMWARE: Memory map bin file not passed
Usage : firmware_loader <Processor Id> <Location of Firmware> <start|stop> [-mmap <memory_map_file>] [-i2c <0|1>]
===Mandatory arguments===
<Processor Id>         0: DSP, 1: Video-M3, 2: Vpss-M3
<Location of Firmware> firmware binary file
<start|stop>           to start/stop the firmware
===Optional arguments===
-mmap                  input memory map bin file name
-i2c                   0: i2c init not done by M3, 1(default): i2c init done by M3
FIRMWARE: isI2cInitRequiredOnM3: 1
FIRMWARE: Default memory configuration is used
MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.2.1
FIRMWARE: Memory Configuration status : In Progress
FIRMWARE: 1 start Successful
Loading HDVPSS (V4L2) Firmware
FIRMWARE: Memory map bin file not passed
Usage : firmware_loader <Processor Id> <Location of Firmware> <start|stop> [-mmap <memory_map_file>] [-i2c <0|1>]
===Mandatory arguments===
<Processor Id>         0: DSP, 1: Video-M3, 2: Vpss-M3
<Location of Firmware> firmware binary file
<start|stop>           to start/stop the firmware
===Optional arguments===
-mmap                  input memory map bin file name
-i2c                   0: i2c init not done by M3, 1(default): i2c init done by M3
FIRMWARE: isI2cInitRequiredOnM3: 0
FIRMWARE: Default memory configuration is used
MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.2.1
FIRMWARE: Memory Configuration status : In Progress
FIRMWARE: 2 start Successful
tvp7002 2-005d: tvp7002 found @ 0x5d (OMAP I2C adapter)
tvp7002 2-005d: Rev. 02 detected.
ti81xxvin ti81xxvin: registered sub device tvp7002
ti81xxvin ti81xxvin: TI81xx HDVPSS Capture driver initialized
HDMI W1 rev 2.0
Starting system message bus: dbus.
Starting telnet daemon.
Starting syslogd/klogd: done
Starting thttpd.
Starting PVR
Starting Matrix GUI application.

_____                    _____           _         _
| _ |___ ___ ___ ___   | _ |___ ___ |_|___ ___| |_
|     | _| .'| . | . | |   __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
              |___|                    |___|

Arago Project http://arago-project.org dm816x-evm ttyO2

Arago 2011.09 dm816x-evm ttyO2

dm816x-evm login: root
root@dm816x-evm:~# echo 0 > /sys/devices/platform/vpss/graphics0/enabled
root@dm816x-evm:~# echo 0 > /sys/devices/platform/vpss/graphics1/enabled
root@dm816x-evm:~# lsmod
Module                  Size Used by
bufferclass_ti          4950 0
omaplfb                10794 0
pvrsrvkm              155594 2 bufferclass_ti,omaplfb
ti81xxhdmi             16163 0
ti81xxvin              20388 0
tvp7002                 6405 1
ti81xxvo               21210 0
ti81xxfb               21979 3
vpss                   75009 5 omaplfb,ti81xxhdmi,ti81xxvin,ti81xxvo,ti81xxfb
syslink              1119122 0
ipv6                  209855 12
root@dm816x-evm:~# gst-launch -e v4l2src always-copy=false queue-size=12 num-buf
fers=3000 ! 'video/x-raw-yuv-strided,format=(fourcc)NV12,width=1280,height=720,f
ramerate=(fraction)20/1' ! omxbufferalloc numBuffers=12 ! omx_h264enc bitrate=50
00000 ! gstperf ! filesink location=v4l2cap.h264
Setting pipeline to PAUSED ...

Mode set is 1080
allocating 12 buffers of size:1382400!!
allocated outbuf:0x43fd5080
allocated ------------[ cut here ]------------
WARNING: at kernel/softirq.c:159 local_bh_enable+0x54/0xc4()
Modules linked in: bufferclass_ti omaplfb pvrsrvkm ti81xxhdmi ti81xxvin tvp7002 ti81xxvo ti81xxfb vpss syslink ipv6
Backtrace:
[<c0049bb8>] (dump_backtrace+0x0/0x110) from [<c039b7d4>] (dump_stack+0x18/0x1c)
r7:00000000 r6:c0072fb8 r5:c0465b10 r4:0000009f
[<c039b7bc>] (dump_stack+0x0/0x1c) from [<c006da3c>] (warn_slowpath_common+0x54/0x6c)
[<c006d9e8>] (warn_slowpath_common+0x0/0x6c) from [<c006da78>] (warn_slowpath_null+0x24/0x2c)
r9:c0516d04 r8:d708c800 r7:0000000e r6:d3637c00 r5:c04f0590
r4:c0542040
[<c006da54>] (warn_slowpath_null+0x0/0x2c) from [<c0072fb8>] (local_bh_enable+0x54/0xc4)
[<c0072f64>] (local_bh_enable+0x0/0xc4) from [<c0067934>] (omap_mbox_msg_send+0xcc/0xdc)
r5:c04f0590 r4:00000000
[<c0067868>] (omap_mbox_msg_send+0x0/0xdc) from [<c02dc724>] (notify_shm_drv_send_event+0x1c8/0x208)
r5:00000001 r4:00000000
[<c02dc55c>] (notify_shm_drv_send_event+0x0/0x208) from [<c02d9eb4>] (notify_send_event+0x114/0x26c)
[<c02d9da0>] (notify_send_event+0x0/0x26c) from [<bf18fa08>] (vps_fvid2_queue+0xe4/0x21c [vpss])
[<bf18f924>] (vps_fvid2_queue+0x0/0x21c [vpss]) from [<bf198cfc>] (capture_queue+0x50/0x64 [vpss])
r8:bf1d1414 r7:60000013 r6:d1cd6080 r5:00000000 r4:d1c6a400
[<bf198cac>] (capture_queue+0x0/0x64 [vpss]) from [<bf1d01d4>] (ti81xxvin_buffer_queue+0x9c/0xe8 [ti81xxvin])
r5:d1c6f400 r4:d1c6a400
[<bf1d0138>] (ti81xxvin_buffer_queue+0x0/0xe8 [ti81xxvin]) from [<c02b3614>] (videobuf_streamon+0x80/0xd0)
r7:60000013 r6:d1c6f5c4 r5:d1c6f504 r4:d1cd6080
[<c02b3594>] (videobuf_streamon+0x0/0xd0) from [<bf1cfc4c>] (vidioc_streamon+0x244/0x400 [ti81xxvin])
r7:d1c7c400 r6:00000001 r5:d1c6f400 r4:d1c6f504
[<bf1cfa08>] (vidioc_streamon+0x0/0x400 [ti81xxvin]) from [<c02a8f1c>] (__video_do_ioctl+0x1618/0x3f34)
r6:40045612 r5:00000000 r4:00000001
[<c02a7904>] (__video_do_ioctl+0x0/0x3f34) from [<c02a76f4>] (__video_usercopy+0x2e4/0x428)
[<c02a7410>] (__video_usercopy+0x0/0x428) from [<c02a7868>] (video_ioctl2+0x30/0x38)
[<c02a7838>] (video_ioctl2+0x0/0x38) from [<c02a68a8>] (v4l2_ioctl+0xe8/0x11c)
r5:d1c7c400 r4:d1cd6f80
[<c02a67c0>] (v4l2_ioctl+0x0/0x11c) from [<c00d305c>] (vfs_ioctl+0x28/0x44)
r9:cf110000 r8:00021268 r7:0000001c r6:0000001c r5:d1cd6f80
r4:00000000
[<c00d3034>] (vfs_ioctl+0x0/0x44) from [<c00d376c>] (do_vfs_ioctl+0x500/0x540)
[<c00d326c>] (do_vfs_ioctl+0x0/0x540) from [<c00d3804>] (sys_ioctl+0x58/0x7c)
[<c00d37ac>] (sys_ioctl+0x0/0x7c) from [<c0045e00>] (ret_fast_syscall+0x0/0x30)
r8:c0045fa8 r7:00000036 r6:00021250 r5:00020500 r4:00203f60
---[ end trace 3bf35c8b9327a32a ]---
outbuf:0x44126880
allocated outbuf:0x44278080
allocated outbuf:0x443c9880
allocated outbuf:0x4451b080
allocated outbuf:0x4466c880
allocated outbuf:0x447be080
allocated outbuf:0x4490f880
allocated outbuf:0x44a61080
allocated outbuf:0x44bb2880
allocated outbuf:0x44d04080
allocated outbuf:0x44e55880
Pipeline is live and does not need PREROLL ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
perf0: frames: 63       current: 62.73   average: 62.73 arm-load: 27
perf0: frames: 124      current: 60.23   average: 61.48 arm-load: 7
perf0: frames: 184      current: 59.72   average: 60.89 arm-load: 7
perf0: frames: 245      current: 60.23   average: 60.73 arm-load: 15
perf0: frames: 305      current: 59.72   average: 60.53 arm-load: 5
perf0: frames: 366      current: 60.23   average: 60.48 arm-load: 7
perf0: frames: 426      current: 59.72   average: 60.37 arm-load: 8
perf0: frames: 487      current: 60.23   average: 60.35 arm-load: 1
perf0: frames: 547      current: 59.73   average: 60.28 arm-load: 5
perf0: frames: 608      current: 60.23   average: 60.28 arm-load: 7
perf0: frames: 669      current: 59.75   average: 60.23 arm-load: 8
perf0: frames: 730      current: 60.23   average: 60.23 arm-load: 5
perf0: frames: 791      current: 59.76   average: 60.19 arm-load: 4
perf0: frames: 852      current: 60.23   average: 60.20 arm-load: 8
perf0: frames: 913      current: 60.23   average: 60.20 arm-load: 6
perf0: frames: 973      current: 59.72   average: 60.17 arm-load: 7
perf0: frames: 1034     current: 60.23   average: 60.17 arm-load: 3
perf0: frames: 1094     current: 59.73   average: 60.15 arm-load: 8
perf0: frames: 1155     current: 60.24   average: 60.15 arm-load: 4
perf0: frames: 1215     current: 59.72   average: 60.13 arm-load: 3
perf0: frames: 1276     current: 60.23   average: 60.14 arm-load: 6
perf0: frames: 1336     current: 59.72   average: 60.12 arm-load: 7
perf0: frames: 1397     current: 60.23   average: 60.12 arm-load: 6
perf0: frames: 1457     current: 59.72   average: 60.11 arm-load: 7
perf0: frames: 1518     current: 60.23   average: 60.11 arm-load: 5
perf0: frames: 1579     current: 59.75   average: 60.10 arm-load: 8
perf0: frames: 1640     current: 60.24   average: 60.10 arm-load: 4
perf0: frames: 1701     current: 59.75   average: 60.09 arm-load: 9
perf0: frames: 1762     current: 60.23   average: 60.09 arm-load: 6
perf0: frames: 1823     current: 60.23   average: 60.10 arm-load: 8
perf0: frames: 1883     current: 59.72   average: 60.09 arm-load: 5
perf0: frames: 1944     current: 60.23   average: 60.09 arm-load: 9
perf0: frames: 2004     current: 59.72   average: 60.08 arm-load: 6
perf0: frames: 2065     current: 60.23   average: 60.09 arm-load: 11
perf0: frames: 2125     current: 59.71   average: 60.07 arm-load: 7
perf0: frames: 2186     current: 60.25   average: 60.08 arm-load: 5
perf0: frames: 2246     current: 59.72   average: 60.07 arm-load: 9
perf0: frames: 2307     current: 60.23   average: 60.07 arm-load: 3
perf0: frames: 2367     current: 59.72   average: 60.07 arm-load: 6
perf0: frames: 2428     current: 60.23   average: 60.07 arm-load: 43
perf0: frames: 2489     current: 59.75   average: 60.06 arm-load: 6
perf0: frames: 2550     current: 60.23   average: 60.07 arm-load: 7
perf0: frames: 2611     current: 59.76   average: 60.06 arm-load: 6
perf0: frames: 2672     current: 60.21   average: 60.06 arm-load: 5
perf0: frames: 2733     current: 60.23   average: 60.07 arm-load: 6
perf0: frames: 2793     current: 59.74   average: 60.06 arm-load: 11
perf0: frames: 2854     current: 60.24   average: 60.06 arm-load: 2
perf0: frames: 2914     current: 59.72   average: 60.06 arm-load: 6
perf0: frames: 2975     current: 60.23   average: 60.06 arm-load: 5
Recieved EOS event, press <CTRL+C> to terminate pipeline.
Got EOS from element "pipeline0".
Execution ended after 50019783144 ns.
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
root@dm816x-evm:~#

Posted by P W

on Jun 07 2012 20:22 PM

Intellectual580 points

Hi Hardick.

I forgot to ask this question. Does it mean only 1 VIP capturing(through component) is supported for now? Or is there a port other than component that I can use for capturing?

Posted by HardikShah

on Jun 07 2012 22:46 PM