TI E2E Community
Digital Signal Processors (DSP)
DaVinci™ Video Processors
DM816x, C6A816x and AM389x Processors Forum
why decode_display_a8host_debug.xv5T block when output to ypbpr display?
why decode_display_a8host_debug.xv5T block when output to ypbpr display? But the hdmi output is OK!
root@dm816x-evm:/home# ./decode_display_a8host_debug.xv5T -i 1080P_HP.h264 -w 1920 -h 1080 -f 60 -g 0 -d 1 -c h264input file: 1080P_HP.h264width: 1920height: 1080frame_rate: 60gfx: fbdev disablecodec: h264display_id: 1 Decoder-Display example =============================== OMX_Init completed UIAClient is ready to send a UIA configuration commandUIAClient received UIA_CONFIGURE_ACKUIAClient is done sending requestsUIAClient is ready to send a UIA configuration commandUIAClient received UIA_CONFIGURE_ACKUIAClient is done sending requests opening file decoder compoenent is created PADX: 32 PADY: 24 level set is 12 scalar compoenent is created set input port params (width = 1920, height = 1080) set output port params (width = 1920, height = 1080) set number of channels set input resolution set output resolution enable scalar input port got eventEnable/Disable Event enable scalar output port got eventEnable/Disable Event found handle 0x13af58 for component OMX.TI.VPSSM3.VFDC got display handle found handle 0x13ea60 for component OMX.TI.VPSSM3.CTRL.DCBuffer Size computed: 4147200set input port params (width = 1920, height = 1080) setting input and output memory type to defaultenable input port got eventEnable/Disable Event connect call for decoder-scalar connect call for scalar-display decoder inport buffers allocated decoder outport buffers allocated got eventState changed to: OMX_StateIdle state IDLE Scalar input port use buffer done scalar outport buffers allocated got eventState changed to: OMX_StateIdle scalar state IDLE
can anyone help me?
we will try and let you know. It should have had worked without any issue.
what is your result?
It worked at our end,
can you give me your steps and the detail debug info ?
There is no additinal steps required for component o/p, you alreday put "-d 1" option. Can you check hdcomp is configured for 1080p-60 or not ? In the init script mod for hdmi / hdcomp display is set.
but we want to use V4L2 mode,and the i2c_modeis set to 0 in the boot files。
can your test after set "i2c_mode=0"
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.