For the CLKIN32 pin, the datasheet gives a spec of 7ns rise/fall time. See SPRS614B, Section 7.3.3 table 7-12, item #4.
This seems very tight. Most parts I see are typically shown as 200ns rise/fall. According to the BOM the part selected for the DM8168 EVM (ECS-327SMO) is 200ns. http://www.ecsxtal.com/store/pdf/ecs-327smo.pdf
Is the rise/fall time spec correct? Can you suggest a part that meets this spec?
Andrew,
The datasheet for the DM8168 specifies that the maximum transition time should not exceed 7 ns, but the maximum transition time of 200ns is much slower than the specification on the DM8168 datasheet.
Regards,Marc
Please mark this Forum post as answered via the Verify Answer button below if it helps answer your question. Thanks!