I have a TI816x Netra board with an 816x expansion IO daughter card. On the daughter card, I have an HDMI port with says "HDMI IN2".
Is chains example sufficient for capture of data over this interface.
Hi Answers inline,
Karthik KumarIs this port meant for HDMI in or DVI capture?
Karthik KumarWhich are the Vip ports to which this HDMI/DVI port is connected?
You can figure it out from the Schematics. I think its connected to VIP1
Karthik KumarIs chains example sufficient for capture of data over this interface.
What is this chains example. We dont have any driver for DVI capture in Media controller or in V4L2 capture driver.
If it is DVI source, what kind of media sources can I connect to it?
HDMI is backwards compatible to DVI, you can connected DVD player out or PS3 out in case it supports DVI. But DVI wont support HDMI, so make sure that source is DVI. You can connect to monitor first and make sure that its DVI.
Please mark this post as answered via the Verify Answer button below if you think it answers your question. Thanks!
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.