I am having trouble getting the s-video output working using the latest ezsdk. I am writing test images into fb2 and have switched display2 to svideo using sysfs but I still get no output.
Is there anything else that has changed with this release related to the SD output on s-video?
Thanks in advance.
I tried changing the example applications to point at /dev/fb2 and still no image (on sivdeo or composite). I also tried going back to the 'stock' SDK 5.04 kernel and filesystem but that didn't work either.
Is there anything that changed in this release that I am overlooking?
We will be releasing the SDK 5.05 (most likely within a week), where SD display would be provided as an example. In SDK 5.04, you can look for 'display' example also.
Also you can try following
echo 0 > /sys/devices/platform/vpss/display2/enabled echo "composite" > /sys/devices/platform/vpss/display2/outputecho 1 > /sys/devices/platform/vpss/display2/enabled
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.