Program the .out file in CCS6

San Vs

Hi,

I need to program the .out file generated in CCS 3.1 into my TMDSEVM642. Right now i am using CCS V6, where i am able to select the target configuration and out file. But the program menu is grey'd (disabled). What could be the issue?

over 7 years ago

0 Raja over 7 years ago

TI__Guru* 81335 points

Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com).

Note: We strongly recommend you to create new e2e thread for your queries instead of following up on an old/closed e2e thread, new threads gets more attention than old threads and can provide link of old threads or information on the new post for clarity and faster response.

0 Raja over 7 years ago in reply to Raja

TI__Guru* 81335 points

Did you search in e2e for solution?

0 Titusrathinaraj Stalin over 7 years ago

TI__Guru** 116100 points

Can you please attach the screen shot of the issue ?

If you want to generate the .out in CCSv6 then you should import the CCSv3 based project in CCSv6 (Using 'Import Legacy CCSv3.3 projects') and do rebuild.

Processors

Processors forum

Program the .out file in CCS6