Hi,
I've been working with the OMAPL-138 LogicPD SOM and have developed code for both the ARM and DSP. I would now like to create an SPI bootable version of code. I've read that the file I'll need to load is actually a combination of both "out" files.
I've done some research and beleve I understand how to create a "combined" binary file using out2rprc but at this point am still confused about the rest of the process.
I've also seen mention of two other utilities: AISGen and the Serial FLASH Writer. AISGen seems to want to also create an ".out" file and Serial FLASH Writer wants an "ais" file.
If anyone knows the sequence of how these utilities should be used to create and install an ARM+DSP SPI FALSH Boot code can you please outline the process?
Thanks!
Jim,
I believe that process is already described in the wiki section mentioned below:
http://processors.wiki.ti.com/index.php/Boot_Images_for_OMAP-L138#OMAP-L138_EVM
You will also find the download links to all the utilities linked from that wiki page. The process of creating the SPI boot image for your application might require you to modify the .cfg file mentioned in that example or change the device settings in the AISGen tool to match the settings in your GEL files.
Hope this helps.
Regards,
Rahul
---------------------------------------------------------------------------------Please click the Verify Answer button on this post if it answers your question.---------------------------------------------------------------------------------