Has anyone had any luck using OpenOCD to do JTAG debugging on the AM1808? OpenOCD comes packaged with a config file for the xds100v2 JTAG adaptor I am using, but none of the board config files look applicable.
Chris
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Chris,
I think, OpenOCD had the support (.cfg) for OMAPL138 (ARM9+DSP), so please try to tweak the config (.cfg) to make it work on AM1808 (ARM9).
http://openocd.sourceforge.net/doc/pdf/openocd.pdf
http://processors.wiki.ti.com/index.php/Debugging_on_DaVinci_using_OpenOCD