ccs5.2 gel file DDR initialization error

jianming liao

Intellectual 370 points

Other Parts Discussed in Thread: OMAPL138

My cpu is omapl138 , when the gel file is load,some error occur:

Please help me ! thank you.

over 8 years ago

0 Titusrathinaraj Stalin over 8 years ago

TI__Guru** 116100 points

Hi,
What board and emulator are you using ?
I presume that you are using OMAPL138 LCDK board with XDS100v2 emulator.
Could you please set adaptive clocking to 1MHz in target configuration.

processors.wiki.ti.com/.../XDS100

0 jianming liao over 8 years ago in reply to Titusrathinaraj Stalin

Intellectual 370 points

I have set the clock as you say,

But it does not work! The problem still exists。。。

Could you please tell me how to resolve it?

Thank you very much!

0 Titusrathinaraj Stalin over 8 years ago in reply to jianming liao

TI__Guru** 116100 points

Hi,

From your first screen shot, it seems to be you are using gel file for DSP on OMAPL138 LCDK board which is ARM will be the master.

Did you modify the target configuration ?

Select "ARM' and give the path for gel file location and select nothing for DSP core.

Processors

Processors forum

ccs5.2 gel file DDR initialization error