omap l138 camera and lcd

Jagadish Haldar

Other Parts Discussed in Thread: OMAPL138

Dear all I have an omapl138 lcdk. I want to capture image from camera and display on lcd. Kindly help me to choose the proper lcd and camera for my lcdk

over 7 years ago

0 Titusrathinaraj Stalin over 7 years ago

TI__Guru** 116100 points

You can use Leopard camera (36pin) on LCDK board and you can make use of VGA port to display.
processors.wiki.ti.com/.../C6748_Development_Kit_(LCDK)

0 Shankari G over 7 years ago

TI__Mastermind 43955 points

Hi Jagadish,

You may buy a LCD monitor with VGA connector for display.

Camera - As Titus suggested you may buy a leopard Imaging camera.

0 Jagadish Haldar over 7 years ago in reply to Titusrathinaraj Stalin

Prodigy 180 points

Thank you very much for your reply. I am planning to use vga for display and rca input to connect camera. I am using linux mcsdk. I don't know how to capture image from rca and display on vga monitor.

Kindly help me on this.

Processors

Processors forum

omap l138 camera and lcd