SECDEVTOOL-OMAPL138C6748: Connecting PC and EVM OMAPL138 development kit via Ethernet cable

Arun Kumar77

Part Number: SECDEVTOOL-OMAPL138C6748
Other Parts Discussed in Thread: OMAPL138

I am Using EVM OMAPL138 Development kit for Ethernet Interface between PC and Development Kit..I extracted the whole project from TI's official site.(From OMAPL138_StarterWare_1_10_04_01 /build/armv5/cgt_css/omapl138/evmOMAPL138/enet_lwip). I want to transfer a single character from PC to My development board and vice versa using this project...how it is done?? With the help of installing Tera term in our PC.. is it possible??? If possible what might be the configuration for the tera term and what are the steps???

over 6 years ago

0 Yordan Kovachev over 6 years ago

TI__Guru**** 161600 points

Hi,

I've notified the sw team. They will post their feedback directly here.

Best Regards,
Yordan

0 Arun Kumar77 over 6 years ago in reply to Yordan Kovachev

Intellectual 355 points

0 Sahin Okur over 6 years ago in reply to Arun Kumar77

TI__Mastermind 27355 points

Hi Arun,

Please refer to the Starterware User's Guide for steps on running the ethernet examples: processors.wiki.ti.com/.../StarterWare_01.10.01.01_User_Guide

If you have any questions, please let us know.

0 Arun Kumar77 over 6 years ago in reply to Sahin Okur

Intellectual 355 points

Hi sahin,

I go through the site u have mentioned.

In echo server application with peer to peer connection one clarification needed.

With peer to peer connection:

Connect the Ethernet port on board to the host Ethernet port via an Ethernet cable.
Assign a static IP address to the host machine.
Run a DHCP server application on the host.
Execute the example application on the target.

In this line ,what is DHCP server application??How to run dhcp server application in our Host???

0 Sahin Okur over 6 years ago in reply to Arun Kumar77

TI__Mastermind 27355 points

Hi Arun,

You can probably use any DHCP server application for Windows, similar to the one used in this thread.

0 Arun Kumar77 over 6 years ago in reply to Sahin Okur

Intellectual 355 points

Hi sahin,

I am using Ubuntu.Is there any DHCP server application in starterware folder(OMAPL138_StarterWare_1_10_04_01) ???

0 Sahin Okur over 6 years ago in reply to Arun Kumar77

TI__Mastermind 27355 points

Hi Arun,

It looks like there is a PC host application for Linux under host_apps/enet_client. It compares the sent and received data for integrity and prints the results to the console. Refer to the "README" file located in that directory for instructions on executing it.

Processors

Processors forum

SECDEVTOOL-OMAPL138C6748: Connecting PC and EVM OMAPL138 development kit via Ethernet cable