Getting started with OMAP3

A good starting point for the OMAP3™ platforms is OMAP3 Overview

For OMAPL1 / C674x check out Category:OMAPL1.

5 Replies

  • The links are temporarily down. please check back on Tuesday, May 12.

  • Here are some good links to get started from a much older post (OMAP3 specific as only OMAP3 was available at the time):

    OMAP35x Home Page (links to various hardware specific OMAP documents) -- http://www.ti.com/omap35x

    BeagleBoard.org (low cost OMAP35x based board targeted at the open source community) -- http://beagleboard.org/

    OMAP35x EVM from Mistral (documentation and FAQs specific to the EVM board) -- http://www.mistralsolutions.com/business_divisons/omap_3evm.php

    OMAP35x EVM Registration Page (register your EVM and access the OMAP35x software updates) -- www.ti.com/omapregistration 

    http://opensource.ti.com and http://linux.omap.com are also a valuable resources.

    http://tiexpressdsp.com is great for learning about Codec Engine, which will be made available for the OMAP3525/OMAP3530 processors this year.
     

    If you have more useful links that could be added please make a post :)

    EDIT: Adding in a link to the OMAP/Davinci workshop which is now publicly posted on the Wiki - http://focus.ti.com/docs/training/catalog/events/event.jhtml?sku=4DW102644

  • In reply to Bernie Thompson TI:

    You can find general beagleboard info, SD Card Images for Ubuntu and Angstrom

    http://elinux.org/Main_Page

    http://elinux.org/BeagleBoard

    http://www.angstrom-distribution.org/beagleboard-demo-image-available

  • Hi,

    I think the most excited starting is TEXAS INSTRUMENTS Manuals ...... it is simple to understand and supported by the samples that cover all functionality of the OMAP35x

  • In reply to Ahmed Abdullah:

    hello, how to start TrustZone development on OMAP Platform ? can we use the beagleBoard to develop TEE? Thanks!