TI E2E Community
Digital Signal Processors (DSP)
C6000 Single Core DSP
C64x Single Core DSP Forum
How configure CCS 3.3 for DM6437 EVM board?
I have troubles to connect from CCS 3.3 to TMS320DM6437 EVM board. I am using Blackhawk USB560BP JTAG emulator.
I think I didn't configure CCS properly for TMS320DM6437 EVM board or missing Blackhawk driver for this board.
When I was configuring CCS I didn't see DM6437 in available options, so I selected C64x+ board.
Can anyone explain how should I properly configure CCS for TMS320DM6437 EVM board?
Try to import BH-USB560bp_DM643x.ccs in your CCS setup and add to it the GEL file.
And is should look like this
Thank you for your response. I've succeeded to connect to EVM via JTAG as you described with some errors.
At the same time I found that for testing purpose I can connect to DM6437 EVM simply via mini USB without Blackhawk JTAG at all.
However when I tried to configure CCS to connect via mini USB I've found that I don't have DM6437USB emulator in the list of available configurations.
Could you advise how should I configure CCS to connect to DM6437 EVM via mini USB port.
P.S. I suspect that all my problems are because I don't have installation CD which should come with DM6437 EVM. That CD was lost.
I however downloaded everything related to DM6437 EVM from web site of Spectrum Digital.
Attempt the same steps in the setup of CCS but use this "evmdm6437.ccs" in the import and see if it is installed in your CCS by SD installer.
And it should look like this
Thank you for your response.
Could you also explain what is purpose of intermediate nodes ICEPICK_C_0 (router) and DSP (subpath)?
Why I should leave Gel file field empty for router ICEPICK_C_0 ?
Since all new TI devices now have control and CPUs, this is part of the JTAG/Boundary scan path setup. It does not require a GEL to control it.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.