TI E2E Community
Digital Signal Processors (DSP)
C6000 Single Core DSP
C64x Single Core DSP Forum
VCP2 for frame length larger than 256 and soft decision
My goal is to process convolutional coded data using VCP2 coprocessor in DSP C6474 (which should be identical to 6488). Here is my VCP2 basic parameter setting:
VCP2BASEPar.frameLen = FL;
VCP2BASEPar.rate = 2;
VCP2BASEPar.constLen = 9;
VCP2BASEPar.yamTh = 0;
VCP2BASEPar.stateNum = 0;
VCP2BASEPar.decision = VCP2_DECISION_SOFT;
VCP2BASEPar.readFlag = 0;
VCP2BASEPar.tbConvrgMode = 0;
VCP2BASEPar.tailBitEnable = 0;
VCP2BASEPar.traceBackIndex = 0;
VCP2BASEPar.outOrder = 0;
VCP2BASEPar.perf = VCP2_PERF_MOST_CRITICAL;
When I select the FL less than 256, my code works and I get the expected results. However for the same code but FL > 256, VCP2’s behavior is not the same. It seems it never finishes the processing of the data, i.e, VCP2_statRun() always returns 1.
I am wondering if somebody has some insight into this problem.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.