This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TMS320C6713B
I want to find information about the alternate(upgrade) starter kit /Eval kit of TMS320c6713 DSK
which will support CCS v6.0 & Windows 7 and similar configuration of TMS320c6713 DSK starter kit.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Cvetolin Shulev-XID:
Hi Tsvetolin Shulev
Thanks for your response. Actually, my requirement for digital signal processing are 32 bit EMIF external interface, 16 bit GPIO and one McBSP communication that was available in
TMS320c6713 starter kit. But your suggest board(TMS320c6748) is for Video & signal process with SATA, USB and serial communication for external interface. I have not found any external EMIF I/O & GPIO interface in your recommended kit. So, my required DSP board for my present project has to be similar with TMS320c6713 which has the above interfacing facilities and also support CCSv6.0 and windows 7.
Wait for your kind next suggestion.
In reply to Gopal Sarkar:
Wait for your valuable suggestions ..
Please click the "Verify Answer" button on this post if it answers your question.
In reply to SenthilKumar Srinivasan:
Presently, i am working on TMS320c6713 dsk with CCS v3.3 and windows XP. But as per our present scenario , our all OS platform has been updated to windows 7
and we have purchased CCS v6.0. So my present DSP (c6713)platform is not supporting to CCS v6.0 and windows 7. For that reason, I am looking for new updated
DSP kit which is similar feature with c6713 and supporting to CCS v6.0 and windows 7. I need 32bits EMIF external interface & 16 bits GPIO and one McBSP interface.
wait for your reply .
Search for answers, Ask a question, click Resolved when complete, Help others, Learn more.
In reply to RandyP:
Thanks for your kind information. For my present project with TMS320c6713 starter kit, i am using 32bits external EMIF I/O interface for data process and 11 GPIO pins for control process.
But due to my os update (Windows xp to 7), this board and ccsv3.3 are not supported. But i have checked and have not found any EMIF port and GPIO port in your recommended
TMS320C6748 DSP Development Kit (LCDK). That you are saying, this features are in TMS320c6748 processor not in directly Development Kit (LCDK). ( http://www.ti.com/lit/ml/sprt633/sprt633.pdf
, i can access external interface like your above information.
Wait for your reply.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.