This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TMS320DM368 EVM

TMS320DM368 EVM  WILL SUPPORT SIMULINK.

REPLY ASAP

  • You should consult the Mathworks support forum about this.

    SIMULINK is a third party product and is not supported by TI.

    Best Regards,
    Yordan

     


     Please make sure you read the forum guidelines first.

  • I agree with Yordan, you should contact MathWorks Tech Support about this.

    MathWorks tools can generate ANSI / ISO C code - which can be used on just about any TI MCU or DSP. The typical workflow is to generate C code of your algorithm and import that C code in CCS and integrate it into your CCS project. We have many many customers doing this, from simple experiments to mass market deployment.

    AFAIK no specific DaVinci support exists from MathWorks, so you would be using the typical work flow as described above.

    Cheers,

    -Brian

    Brian McKay  |  Technical Marketing  |  www.mathworks.com

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.