Audio issue on OMAP4 (panda board)

Other Parts Discussed in Thread: TWL6030, WL1271Hi, We are currently trying to get audio working on Pandabaord. We were successful in getting Kernel 3.0 + GB (audio working) When the same support to play back a audio wav file with kernel 3.0 + ICS (android 4.0) it is not able to play the file shell@android:/ $ tinyplay guitarup_full.wav [ 96.974670] SDP4430 Media: asoc: SDP4430 Media no valid playback route from source to sink Unable to open PCM device 0 (cannot set hw params: Invalid argument) Please let me know if anyone has faced the same issue and what could be the problem. Regards Yogesh ***************************** log start ************************* Texas Instruments X-Loader 1.41 (May 12 2011 - 10:52:12) Starting OS Bootloader from MMC/SD1 ... U-Boot 1.1.4-L27.13.1^0-dirty (May 12 2011 - 10:48:49) Load address: 0x80e80000 DRAM: 1024 MB Flash: 0 kB Using default environment In: serial Out: serial Err: serial efi partition table: 256 128K xloader 512 256K bootloader 2048 8M boot 18432 256M system 542720 256M cache 1067008 512M userdata 2115584 2562M media Net: KS8851SNL Hit any key to stop autoboot: 5  4  0 PANDA # setenv bootargs 'console=ttyO2,115200n8 androidboot.console=ttyO2 mem=456M@0x80000000 root=/dev/mmcblk0p2 rw rootdelay=2 init=/init vram="32M" omapfb.vram=0:16M omapdss.def_disp=hdmi consoleblank=0' PANDA # setenv bootcmd 'mmcinit 0;fatload mmc 0 0x80000000 uImage; bootm 0x80000000' PANDA # boot 4318420 bytes read ## Booting image at 80000000 ... Image Name: Linux-3.0.8-00218-gbe260b7-dirty Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4318356 Bytes = 4.1 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK OK I2C read: I/O error Blaze/SDP Board. Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.8-00218-gbe260b7-dirty (root@pcb-skreddy) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #8 SMP PREEMPT Fri Dec 9 14:52:49 IST 2011 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region overlap). [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.1 [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000 [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1082000 s6912 r8192 d13568 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 168448 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G androidboot.console=ttyO2 console=ttyO2,115200n8 androidboot.console=ttyO2 mem=456M@0x80000000 root=/dev/mmcblk0p2 rw rootdelay=2 init=/init vram="32M" omapfb.vram=0:16M omapdss.def_disp=hdmi consoleblank=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 512MB 152MB = 664MB total [ 0.000000] Memory: 662184k/1111392k available, 141984k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0049000 ( 260 kB) [ 0.000000] .text : 0xc0049000 - 0xc0882000 (8420 kB) [ 0.000000] .data : 0xc0882000 - 0xc08ff600 ( 502 kB) [ 0.000000] .bss : 0xc08ff624 - 0xc0a77418 (1504 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744) [ 0.015686] pid_max: default: 32768 minimum: 301 [ 0.070617] Mount-cache hash table entries: 512 [ 0.070617] Initializing cgroup subsys debug [ 0.070617] Initializing cgroup subsys cpuacct [ 0.070617] Initializing cgroup subsys freezer [ 0.071472] CPU: Testing write buffer coherency: ok [ 0.071624] L310 cache controller enabled [ 0.071838] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B [ 0.149963] CPU1: Booted secondary processor [ 0.220275] Brought up 2 CPUs [ 0.220306] SMP: Total of 2 processors activated (4022.78 BogoMIPS). [ 0.220489] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw [ 0.220489] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr [ 0.222869] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1 [ 0.222869] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2 [ 0.222900] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe [ 0.222900] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg [ 0.222900] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.222900] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.222930] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private [ 0.222930] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if [ 0.223022] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci [ 0.223022] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci [ 0.223022] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. [ 0.228088] omap_hwmod: mcpdm: cannot be enabled (3) [ 0.232940] print_constraints: dummy: [ 0.233459] NET: Registered protocol family 16 [ 0.233459] GPMC revision 6.0 [ 0.233612] EMIF0 is enabled with IRQ142 [ 0.234527] EMIF1 is enabled with IRQ143 [ 0.234527] Last reset was cold reset (PRM_RSTST=0x1) [ 0.234619] [ 0.234954] OMAP GPIO hardware version 0.1 [ 0.236145] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.236145] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.236145] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [ 0.238006] omap_hwmod_mux_init: Could not allocate device mux entry [ 0.247406] OMAP DMA hardware revision 0.0 [ 0.248107] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0 [ 0.253753] bio: create slab at 0 [ 0.254058] print_constraints: vwl1271: 1800 mV [ 0.254058] i2c-core: driver [twl] using legacy suspend method [ 0.254608] i2c-core: driver [twl] using legacy resume method [ 0.254608] SCSI subsystem initialized [ 0.254608] usbcore: registered new interface driver usbfs [ 0.255126] usbcore: registered new interface driver hub [ 0.255218] usbcore: registered new device driver usb [ 0.267120] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz [ 0.267639] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.267822] twl6030: PIH (irq 39) chaining IRQs 368..387 [ 0.269561] print_constraints: VUSB: 3300 mV normal standby [ 0.472229] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.472778] print_constraints: VMMC: 1200 3000 mV at 3000 mV normal standby [ 0.473175] print_constraints: VPP: 1800 2500 mV at 1900 mV normal standby [ 0.473175] print_constraints: VCXIO: 1800 mV normal standby [ 0.473449] print_constraints: VDAC: 1800 mV normal standby [ 0.474060] print_constraints: VAUX2_6030: 1200 2800 mV at 1800 mV normal standby [ 0.474456] print_constraints: VAUX3_6030: 1000 3000 mV at 1200 mV normal standby [ 0.475158] print_constraints: CLK32KG: [ 0.475189] print_constraints: VANA: 2100 mV normal standby [ 0.485870] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz [ 0.501495] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.517120] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz [ 0.517608] omap-rproc omap-rproc.0: dsp is available [ 0.517608] omap-rproc omap-rproc.1: ipu is available [ 0.517608] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.518341] Bluetooth: Core ver 2.16 [ 0.518341] NET: Registered protocol family 31 [ 0.518341] Bluetooth: HCI device and connection manager initialized [ 0.518402] Bluetooth: HCI socket layer initialized [ 0.518402] Bluetooth: L2CAP socket layer initialized [ 0.518402] Bluetooth: SCO socket layer initialized [ 0.518798] cfg80211: Calling CRDA to update world regulatory domain [ 0.518890] Switching to clocksource 32k_counter [ 0.522460] musb-hdrc: version 6.0, musb-dma, peripheral [ 0.522888] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124 [ 0.523040] NET: Registered protocol family 2 [ 0.523437] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.524230] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.524932] Switched to NOHz mode on CPU #0 [ 0.524963] Switched to NOHz mode on CPU #1 [ 0.524993] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes) [ 0.524993] TCP: Hash tables configured (established 131072 bind 65536) [ 0.531280] TCP reno registered [ 0.531280] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.531463] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.531463] NET: Registered protocol family 1 [ 0.850524] omap-iommu omap-iommu.0: ducati registered [ 0.851623] omap-iommu omap-iommu.1: tesla registered [ 0.883911] ashmem: initialized [ 0.889526] fuse init (API version 7.16) [ 0.890075] msgmni has been set to 1293 [ 0.891448] io scheduler noop registered [ 0.891448] io scheduler deadline registered [ 0.891448] io scheduler cfq registered (default) [ 0.891571] start plist test [ 0.894866] end plist test [ 0.898376] OMAP DSS rev 4.0 [ 0.902801] dsscomp: initializing. [ 0.902984] misc dsscomp: found 2 displays and 4 overlays [ 0.903228] could not allocate slot [ 0.903228] omap-rproc omap-rproc.1: powering up ipu [ 0.903808] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully [ 0.903808] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully [ 0.903808] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 0.925872] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 0.968078] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.176971] console [ttyO2] enabled [ 2.271209] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 2.451141] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000 [ 2.459686] omap_ion_probe: adding heap tiler of type 4 with ada00000@6000000 [ 2.467590] omap_ion_probe: adding heap nonsecure_tiler of type 4 with a0200000@2000000 [ 2.476440] PVR: PVRCore_Init [ 2.479858] PVR: PVRSRVDriverProbe(pDevice=eb4ad800) [ 2.485534] PVR: SGX register base: 0x56000000 [ 2.490417] PVR: SGX register size: 65535 [ 2.494842] PVR: SGX IRQ: 53 [ 2.498016] PVR: EnableSystemClocks: Enabling System Clocks [ 2.504211] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [167, drivers/gpu/pvr/omap4/sysutils_linux.c] [ 2.517181] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [167, drivers/gpu/pvr/omap4/sysutils_linux.c] [ 2.530059] PVR: PVRCore_Init: major device 251 [ 2.535186] brd: module loaded [ 2.535186] loop: module loaded [ 2.553039] PPP generic driver version 2.4.2 [ 2.557861] PPP Deflate Compression module registered [ 2.563415] PPP BSD Compression module registered [ 2.569244] PPP MPPE Compression module registered [ 2.574584] NET: Registered protocol family 24 [ 2.579528] usbcore: registered new interface driver asix [ 2.586944] usbcore: registered new interface driver cdc_ether [ 2.593353] usbcore: registered new interface driver smsc95xx [ 2.599822] usbcore: registered new interface driver net1080 [ 2.606079] usbcore: registered new interface driver cdc_subset [ 2.612640] usbcore: registered new interface driver zaurus [ 2.618774] cdc_ncm: 04-Aug-2011 [ 2.622375] usbcore: registered new interface driver cdc_ncm [ 2.628662] usbcore: registered new interface driver zd1201 [ 2.634857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.642181] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 2.642181] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 2.656707] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 2.687805] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 2.694183] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.701660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.709564] usb usb1: Product: OMAP-EHCI Host Controller [ 2.715423] usb usb1: Manufacturer: Linux 3.0.8-00218-gbe260b7-dirty ehci_hcd [ 2.723297] usb usb1: SerialNumber: ehci-omap.0 [ 2.728332] hub 1-0:1.0: USB hub found [ 2.732757] hub 1-0:1.0: 3 ports detected [ 2.789123] usbcore: registered new interface driver cdc_acm [ 2.789123] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.804229] Initializing USB Mass Storage driver... [ 2.809692] usbcore: registered new interface driver usb-storage [ 2.816284] USB Mass Storage support registered. [ 2.821502] usbcore: registered new interface driver usbserial [ 2.821502] usbserial: USB Serial Driver core [ 2.832824] USB Serial support registered for Keyspan - (without firmware) [ 2.840362] USB Serial support registered for Keyspan 1 port adapter [ 2.847351] USB Serial support registered for Keyspan 2 port adapter [ 2.854370] USB Serial support registered for Keyspan 4 port adapter [ 2.861389] usbcore: registered new interface driver keyspan [ 2.867614] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver [ 3.076141] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 3.083648] android_usb gadget: Number of LUNs=1 [ 3.088745] lun0: LUN: removable file: (no medium) [ 3.089904] usb 1-1: new high speed USB device number 2 using ehci-omap [ 3.101348] android_usb gadget: android_usb ready [ 3.106506] mousedev: PS/2 mouse device common for all mice [ 3.113189] twl6030_pwrbutton_probe: Enter [ 3.117828] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input0 [ 3.131011] twl_rtc twl_rtc: Power up reset detected. [ 3.137420] twl_rtc twl_rtc: Enabling TWL-RTC. [ 3.143554] using rtc device, twl_rtc, for alarms [ 3.148773] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 3.155670] i2c /dev entries driver [ 3.160125] lirc_dev: IR Remote Control driver registered, major 248 [ 3.167114] IR NEC protocol handler initialized [ 3.172088] IR RC5(x) protocol handler initialized [ 3.177337] IR RC6 protocol handler initialized [ 3.182281] IR JVC protocol handler initialized [ 3.182373] IR Sony protocol handler initialized [ 3.192291] IR RC5 (streamzap) protocol handler initialized [ 3.198425] IR LIRC bridge handler initialized [ 3.203369] dmm: probe base: fd300000, irq 145 [ 3.210662] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 3.218750] device-mapper: uevent: version 1.0.3 [ 3.224090] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 3.233337] Bluetooth: HCI UART driver ver 2.2 [ 3.238220] Bluetooth: HCI H4 protocol initialized [ 3.243438] cpuidle: using governor ladder [ 3.247924] cpuidle: using governor menu [ 3.254333] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.261566] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.270416] hub 1-1:1.0: USB hub found [ 3.275360] usbcore: registered new interface driver usbhid [ 3.281463] hub 1-1:1.0: 5 ports detected [ 3.285858] usbhid: USB HID core driver [ 3.291198] logger: created 256K log 'log_main' [ 3.296325] logger: created 256K log 'log_events' [ 3.301696] logger: created 256K log 'log_radio' [ 3.306793] logger: created 256K log 'log_system' [ 3.312011] thermal_governor_dev_register:Adding omap_ondie_governor governor [ 3.326965] SDP4430 SoC init [ 3.361236] asoc: null-codec-dai MultiMedia1 mapping ok [ 3.368255] asoc: null-codec-dai MultiMedia2 mapping ok [ 3.375671] asoc: null-codec-dai Voice mapping ok [ 3.382110] asoc: null-codec-dai Tones mapping ok [ 3.388519] asoc: null-codec-dai Vibra mapping ok [ 3.394775] asoc: null-codec-dai MODEM mapping ok [ 3.400939] asoc: null-codec-dai MultiMedia1 LP mapping ok [ 3.408813] asoc: FM Digital omap-mcbsp-dai.1 mapping ok [ 3.415832] asoc: twl6040-dl1 mcpdm-dl mapping ok [ 3.422790] asoc: dmic-hifi omap-dmic-dai-0 mapping ok [ 3.430236] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file [ 3.440216] asoc: twl6040-dl1 mcpdm-dl1 mapping ok [ 3.446563] asoc: twl6040-ul mcpdm-ul1 mapping ok [ 3.452728] asoc: twl6040-dl2 mcpdm-dl2 mapping ok [ 3.458984] asoc: twl6040-vib mcpdm-vib mapping ok [ 3.465301] asoc: Bluetooth omap-mcbsp-dai.0 mapping ok [ 3.472106] asoc: Bluetooth omap-mcbsp-dai.0 mapping ok [ 3.478912] asoc: FM Digital omap-mcbsp-dai.1 mapping ok [ 3.485870] asoc: MODEM omap-mcbsp-dai.1 mapping ok [ 3.492370] asoc: dmic-hifi omap-dmic-abe-dai-0 mapping ok [ 3.499481] asoc: dmic-hifi omap-dmic-abe-dai-1 mapping ok [ 3.506744] asoc: dmic-hifi omap-dmic-abe-dai-2 mapping ok [ 3.514648] input: Panda Headset Jack as /devices/platform/soc-audio/sound/card0/input1 [ 3.527893] asoc: hdmi-audio-codec hdmi-audio-dai mapping ok [ 3.535522] ALSA device list: [ 3.538757] #0: TI OMAP4 Board [ 3.542236] #1: OMAP4HDMI [ 3.545410] GACT probability NOT on [ 3.549224] Mirror/redirect action on [ 3.553222] u32 classifier [ 3.556152] Actions configured [ 3.559875] Netfilter messages via NETLINK v0.30. [ 3.565093] nf_conntrack version 0.5.0 (10346 buckets, 41384 max) [ 3.572631] ctnetlink v0.93: registering with nfnetlink. [ 3.578704] xt_time: kernel timezone is -0000 [ 3.585052] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.591064] usb 1-1.1: new high speed USB device number 3 using ehci-omap [ 3.598480] arp_tables: (C) 2002 David S. Miller [ 3.603576] TCP cubic registered [ 3.607818] NET: Registered protocol family 10 [ 3.617095] Mobile IPv6 [ 3.619750] IPv6 over IPv4 tunneling driver [ 3.626068] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.637603] NET: Registered protocol family 17 [ 3.642425] NET: Registered protocol family 15 [ 3.647430] Bluetooth: RFCOMM TTY layer initialized [ 3.652770] Bluetooth: RFCOMM socket layer initialized [ 3.658386] Bluetooth: RFCOMM ver 1.11 [ 3.662567] mmc0: new SDHC card at address b368 [ 3.667846] NET: Registered protocol family 35 [ 3.672698] mmcblk0: mmc0:b368 00000 7.51 GiB [ 3.678405] lib80211: common routines for IEEE802.11 drivers [ 3.684631] VFP support v0.3: [ 3.687774] mmcblk0: p1 p2 [ 3.699279] implementor 41 architecture 3 part 30 variant 9 rev 1 [ 3.705871] ThumbEE CPU extension supported. [ 3.722717] Registering SWP/SWPB emulation handler [ 3.728179] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.746124] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.755462] Reprogramming LPDDR2 timings to 400000000 Hz [ 3.761718] thermal_cooling_dev_register:Found cpu cpu [ 3.767547] smsc95xx v1.0.4 [ 3.771484] Power Management for TI OMAP4. [ 3.777832] OMAP4 PM: Static dependency added between MPUSS EMIF, MPUSS L4_PER/CFG MPUSS L3_MAIN_1. [ 3.788513] OMAP4 PM: Static dependency added between DUCATI L4_PER/CFG and DUCATI L3. [ 3.798126] sr_init: No PMIC hook to init smartreflex [ 3.803619] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.812011] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.820404] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.828735] SmartReflex Class3 initialized [ 3.838165] clock: disabling unused clocks to save power [ 3.847839] cannot apply mgr(lcd) on inactive device [ 3.853210] omapfb omapfb: failed to apply dispc config [ 3.858734] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 3.861724] cannot apply mgr(tv) on inactive device [ 3.861816] omapfb omapfb: failed to apply dispc config [ 3.864807] cannot apply mgr(lcd2) on inactive device [ 3.864868] omapfb omapfb: failed to apply dispc config [ 3.864868] omapfb omapfb: cannot find default display [ 3.865325] regulator_init_complete: VANA: incomplete constraints, leaving on [ 3.866302] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.866638] regulator_init_complete: VCXIO: incomplete constraints, leaving on [ 3.908691] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 12:10:3f:30:4c:c4 [ 3.929321] omaplfb: OMAPLFB_Init: OMAPLFBInit failed [ 3.935394] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.944427] Waiting 2sec before mounting root device... [ 3.965820] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.972473] mmc1: new SDIO card at address 0001 [ 61.005218] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin [ 65.129211] wl1271: ERROR could not get nvs file: -2 [ 65.146850] wl1271: loaded [ 65.149810] wl1271: initialized [ 65.160095] EXT2-fs (mmcblk0p2): warning: mounting ext3 filesystem as ext2 [ 65.167419] EXT2-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 65.614013] VFS: Mounted root (ext2 filesystem) on device 179:2. [ 65.620697] Freeing init memory: 260K [ 65.666931] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 83.823455] init: cannot find '/vendor/bin/pvrsrvinit', disabling 'pvrsrvinit' [ 84.032348] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 84.122436] android_usb: already disabled [ 84.128570] adb_bind_config shell@android:/ $ [ 84.737609] adb_open shell@android:/ $ tinyplay guitarup_full.wav [ 96.974670] SDP4430 Media: asoc: SDP4430 Media no valid playback route from source to sink Unable to open PCM device 0 (cannot set hw params: Invalid argument) ********************************** Log End *******************************