• State Answer Suggested
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 102 subscribers
  • Views 1148 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

"BBB_JB_Android_3_8_13 image" display does not work

hoseong son
Prodigy 160 points
Other Parts Discussed in Thread: TPS65217

hello.

i tried flashed "BBB_JB_Android_3_8_13.img" on my 8gb sd and boot  my BBB.

but i couldn't found any display on my 7inch HDMI LCD and DVI Monitor.

booting BBB was fine( i checked debugging consol). but display not found.

how can i solve this problem?

  • 0
    Prodigy 160 points
    it's my kernel echo:

    U-Boot SPL 2013.04 (Jun 20 2013 - 22:42:21)
    musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
    musb-hdrc: MHDRC RTL version 2.0
    musb-hdrc: setup fifo_mode 4
    musb-hdrc: 28/31 max ep, 16384/16384 memory
    USB Peripheral mode controller at 47401000 using PIO, IRQ 0
    musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
    musb-hdrc: MHDRC RTL version 2.0
    musb-hdrc: setup fifo_mode 4
    musb-hdrc: 28/31 max ep, 16384/16384 memory
    USB Host mode controller at 47401800 using PIO, IRQ 0
    OMAP SD/MMC: 0
    reading u-boot.img
    reading u-boot.img


    U-Boot 2013.04 (Jun 20 2013 - 22:42:21)

    I2C: ready
    DRAM: 512 MiB
    WARNING: Caches not enabled
    NAND: No NAND device found!!!
    0 MiB
    MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
    *** Warning - readenv() failed, using default environment

    musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
    musb-hdrc: MHDRC RTL version 2.0
    musb-hdrc: setup fifo_mode 4
    musb-hdrc: 28/31 max ep, 16384/16384 memory
    USB Peripheral mode controller at 47401000 using PIO, IRQ 0
    musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
    musb-hdrc: MHDRC RTL version 2.0
    musb-hdrc: setup fifo_mode 4
    musb-hdrc: 28/31 max ep, 16384/16384 memory
    USB Host mode controller at 47401800 using PIO, IRQ 0
    Net: <ethaddr> not set. Validating first E-fuse MAC
    cpsw, usb_ether
    Hit any key to stop autoboot: 0
    mmc0 is current device
    SD/MMC found on device 0
    reading uEnv.txt
    535 bytes read in 4 ms (129.9 KiB/s)
    Loaded environment from uEnv.txt
    Importing environment from mmc ...
    Running uenvcmd ...
    reading zImage
    3320040 bytes read in 399 ms (7.9 MiB/s)
    reading am335x-boneblack.dtb
    24129 bytes read in 8 ms (2.9 MiB/s)
    ## Flattened Device Tree blob at 815f0000
    Booting using the fdt blob at 0x815f0000
    Using Device Tree in place at 815f0000, end 815f8e40

    Starting kernel ...

    Uncompressing Linux... done, booting the kernel.
    [ 0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.13-bone22 (notroot@ubuntu) (gcc version 4.7.3 20130328 (prerelease)3
    [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
    [ 0.000000] Memory policy: ECC disabled, Data cache writeback
    [ 0.000000] AM335X ES1.0 (neon )
    [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0e2c000 s14080 r8192 d14592 u36864
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
    [ 0.000000] Kernel command line: consoleblank=0 console=ttyO0,115200n8 androidboot.console=ttyO0 0
    [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] allocated 1048576 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Memory: 511MB = 511MB total
    [ 0.000000] Memory: 507256k/507256k available, 17032k reserved, 0K highmem
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
    [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc08d6580 (9018 kB)
    [ 0.000000] .init : 0xc08d7000 - 0xc0920700 ( 294 kB)
    [ 0.000000] .data : 0xc0922000 - 0xc09a4e00 ( 524 kB)
    [ 0.000000] .bss : 0xc09a4e00 - 0xc0a1c180 ( 477 kB)
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
    [ 0.000000] NR_IRQS:16 nr_irqs:16 16
    [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
    [ 0.000000] Total of 128 interrupts on 1 active controller
    [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
    [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
    [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
    [ 0.000000] Console: colour dummy device 80x30
    [ 0.000377] Calibrating delay loop... 363.67 BogoMIPS (lpj=354304)
    [ 0.017380] pid_max: default: 32768 minimum: 301
    [ 0.017632] Security Framework initialized
    [ 0.017732] Mount-cache hash table entries: 512
    [ 0.027647] Initializing cgroup subsys cpuacct
    [ 0.027684] Initializing cgroup subsys memory
    [ 0.027753] Initializing cgroup subsys blkio
    [ 0.027905] CPU: Testing write buffer coherency: ok
    [ 0.028497] CPU0: thread -1, cpu 0, socket -1, mpidr 0
    [ 0.028574] Setting up static identity map for 0x806166f0 - 0x80616748
    [ 0.030273] Brought up 1 CPUs
    [ 0.030300] SMP: Total of 1 processors activated (363.67 BogoMIPS).
    [ 0.031699] devtmpfs: initialized
    [ 0.097422] pinctrl core: initialized pinctrl subsystem
    [ 0.097723] rstctl core: initialized rstctl subsystem
    [ 0.098241] regulator-dummy: no parameters
    [ 0.098790] NET: Registered protocol family 16
    [ 0.099946] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.110127] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
    [ 0.110900] platform 49000000.edma: alias fck already exists
    [ 0.110931] platform 49000000.edma: alias fck already exists
    [ 0.110956] platform 49000000.edma: alias fck already exists
    [ 0.112349] OMAP GPIO hardware version 0.1
    [ 0.117158] gpio-rctrl rstctl.3: loaded OK
    [ 0.122357] hw-breakpoint: debug architecture 0x4 unsupported.
    [ 0.124525] cpsw.0: No hwaddr in dt. Using 6c:ec:eb:67:71:38 from efuse
    [ 0.124558] cpsw.1: No hwaddr in dt. Using 6c:ec:eb:67:71:3a from efuse
    [ 0.139303] bio: create slab <bio-0> at 0
    [ 0.150979] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
    [ 0.151433] vmmcsd_fixed: 3300 mV
    [ 0.154344] SCSI subsystem initialized
    [ 0.154772] usbcore: registered new interface driver usbfs
    [ 0.154882] usbcore: registered new interface driver hub
    [ 0.155205] usbcore: registered new device driver usb
    [ 0.157331] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
    [ 0.158973] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
    [ 0.160866] DCDC1: at 1500 mV
    [ 0.162101] vdd_mpu: 925 <--> 1325 mV at 1325 mV
    [ 0.163219] vdd_core: 925 <--> 1150 mV at 1100 mV
    [ 0.164389] LDO1: at 1800 mV
    [ 0.165483] LDO2: at 3300 mV
    [ 0.167515] LDO3: 1800 mV
    [ 0.168724] LDO4: at 3300 mV
    [ 0.169775] tps65217 0-0024: TPS65217 ID 0xe version 1.2
    [ 0.170545] omap_i2c 44e0b000.i2c: unable to select pin group
    [ 0.171344] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
    [ 0.173985] omap_i2c 4819c000.i2c: unable to select pin group
    [ 0.174211] media: Linux media interface: v0.10
    [ 0.174332] Linux video capture interface: v2.00
    [ 0.175001] Advanced Linux Sound Architecture Driver Initialized.
    [ 0.176206] NetLabel: Initializing
    [ 0.176226] NetLabel: domain hash size = 128
    [ 0.176238] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.176353] NetLabel: unlabeled traffic allowed by default
    [ 0.176883] Switching to clocksource gp_timer
    [ 0.233296] NET: Registered protocol family 2
    [ 0.234503] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.234651] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
    [ 0.234813] TCP: Hash tables configured (established 4096 bind 4096)
    [ 0.234918] TCP: reno registered
    [ 0.234947] UDP hash table entries: 256 (order: 1, 12288 bytes)
    [ 0.234992] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
    [ 0.235418] NET: Registered protocol family 1
    [ 0.236141] RPC: Registered named UNIX socket transport module.
    [ 0.236165] RPC: Registered udp transport module.
    [ 0.236179] RPC: Registered tcp transport module.
    [ 0.236191] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 0.237473] CPU PMU: probing PMU on CPU 0
    [ 0.237624] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
    [ 0.238182] omap2_mbox_probe: platform not supported
    [ 0.511522] VFS: Disk quotas dquot_6.5.2
    [ 0.511810] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.513157] NFS: Registering the id_resolver key type
    [ 0.513269] Key type id_resolver registered
    [ 0.513286] Key type id_legacy registered
    [ 0.513360] fuse init (API version 7.20)
    [ 0.514267] Btrfs loaded
    [ 0.514443] msgmni has been set to 990
    [ 0.517565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
    [ 0.517593] io scheduler noop registered
    [ 0.517608] io scheduler deadline registered
    [ 0.517649] io scheduler cfq registered (default)
    [ 0.519808] tps65217-bl tps65217-bl: no platform data provided
    [ 0.519852] tps65217-bl: probe of tps65217-bl failed with error -22
    [ 0.520843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 0.523465] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
    [ 0.523809] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
    [ 1.252265] console [ttyO0] enabled
    [ 1.257111] [drm] Initialized drm 1.1.0 20060810
    [ 1.275565] brd: module loaded
    [ 1.285836] loop: module loaded
    [ 1.289319] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
    [ 1.296649] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
    [ 1.303989] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
    [ 1.311299] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
    [ 1.318603] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
    [ 1.332887] bone-capemgr bone_capemgr.8: Baseboard: 'A335BNLT,00C0,3614BBBK0017'
    [ 1.340712] bone-capemgr bone_capemgr.8: compatible-baseboard=ti,beaglebone-black
    [ 1.376226] bone-capemgr bone_capemgr.8: slot #0: No cape found
    [ 1.413331] bone-capemgr bone_capemgr.8: slot #1: No cape found
    [ 1.450440] bone-capemgr bone_capemgr.8: slot #2: No cape found
    [ 1.487550] bone-capemgr bone_capemgr.8: slot #3: No cape found
    [ 1.493825] bone-capemgr bone_capemgr.8: slot #4: specific override
    [ 1.500449] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 4
    [ 1.508519] bone-capemgr bone_capemgr.8: slot #4: 'Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-'
    [ 1.518696] bone-capemgr bone_capemgr.8: slot #5: specific override
    [ 1.525317] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 5
    [ 1.533381] bone-capemgr bone_capemgr.8: slot #5: 'Bone-Black-HDMI,00A0,Texas Instrument,BB-BONEL'
    [ 1.543478] bone-capemgr bone_capemgr.8: slot #6: specific override
    [ 1.550100] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 6
    [ 1.558165] bone-capemgr bone_capemgr.8: slot #6: 'Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONE'
    [ 1.568832] bone-capemgr bone_capemgr.8: loader: before slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
    [ 1.577752] bone-capemgr bone_capemgr.8: loader: check slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
    [ 1.586681] bone-capemgr bone_capemgr.8: loader: before slot-5 BB-BONELT-HDMI:00A0 (prio 1)
    [ 1.595476] bone-capemgr bone_capemgr.8: loader: check slot-5 BB-BONELT-HDMI:00A0 (prio 1)
    [ 1.604206] bone-capemgr bone_capemgr.8: initialized OK.
    [ 1.609833] bone-capemgr bone_capemgr.8: loader: before slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
    [ 1.618718] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
    [ 1.629507] OneNAND driver initializing
    [ 1.635098] usbcore: registered new interface driver cdc_ether
    [ 1.641316] bone-capemgr bone_capemgr.8: loader: after slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
    [ 1.650128] bone-capemgr bone_capemgr.8: loader: after slot-5 BB-BONELT-HDMI:00A0 (prio 1)
    [ 1.658924] usbcore: registered new interface driver rndis_host
    [ 1.665281] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
    [ 1.674192] usbcore: registered new interface driver cdc_ncm
    [ 1.680192] bone-capemgr bone_capemgr.8: slot #4: Requesting firmware 'cape-bone-2g-emmc1.dtbo' f'
    [ 1.694716] usbcore: registered new interface driver cdc_acm
    [ 1.700692] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 1.709100] Initializing USB Mass Storage driver...
    [ 1.714272] bone-capemgr bone_capemgr.8: slot #4: dtbo 'cape-bone-2g-emmc1.dtbo' loaded; convertie
    [ 1.725022] bone-capemgr bone_capemgr.8: slot #5: Requesting firmware 'cape-boneblack-hdmi-00A0.d'
    [ 1.739503] bone-capemgr bone_capemgr.8: slot #4: #2 overlays
    [ 1.745697] usbcore: registered new interface driver usb-storage
    [ 1.752031] USB Mass Storage support registered.
    [ 1.757847] bone-capemgr bone_capemgr.8: slot #4: Applied #2 overlays.
    [ 1.764777] bone-capemgr bone_capemgr.8: loader: done slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)
    [ 1.773528] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
    [ 1.782348] bone-capemgr bone_capemgr.8: slot #5: dtbo 'cape-boneblack-hdmi-00A0.dtbo' loaded; coe
    [ 1.793825] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
    [ 1.800627] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
    [ 1.805915] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
    [ 1.815779] bone-capemgr bone_capemgr.8: slot #5: #4 overlays
    [ 1.824335] platform 4830e000.fb: alias fck already exists
    [ 1.830478] musb-hdrc musb-hdrc.0.auto: *** mode=3
    [ 1.835592] musb-hdrc musb-hdrc.0.auto: *** power=250
    [ 1.842670] bone-capemgr bone_capemgr.8: slot #5: Applied #4 overlays.
    [ 1.849627] bone-capemgr bone_capemgr.8: loader: done slot-5 BB-BONELT-HDMI:00A0 (prio 1)
    [ 1.858283] bone-capemgr bone_capemgr.8: loader: check slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
    [ 1.867884] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
    [ 1.873172] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
    [ 1.881988] bone-capemgr bone_capemgr.8: loader: after slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
    [ 1.890925] bone-capemgr bone_capemgr.8: slot #6: Requesting firmware 'cape-boneblack-hdmin-00A0.'
    [ 1.905655] musb-hdrc musb-hdrc.1.auto: *** mode=1
    [ 1.910752] musb-hdrc musb-hdrc.1.auto: *** power=250
    [ 1.916102] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
    [ 1.922610] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
    [ 1.930972] bone-capemgr bone_capemgr.8: slot #6: dtbo 'cape-boneblack-hdmin-00A0.dtbo' loaded; ce
    [ 1.942630] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.949791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.957390] usb usb1: Product: MUSB HDRC host driver
    [ 1.962631] usb usb1: Manufacturer: Linux 3.8.13-bone22 musb-hcd
    [ 1.968960] usb usb1: SerialNumber: musb-hdrc.1.auto
    [ 1.974532] bone-capemgr bone_capemgr.8: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HD)
    [ 1.984164] bone-capemgr bone_capemgr.8: slot #6: Failed verification
    [ 1.990963] bone-capemgr bone_capemgr.8: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio)
    [ 2.002110] hub 1-0:1.0: USB hub found
    [ 2.006403] hub 1-0:1.0: 1 port detected
    [ 2.012110] mousedev: PS/2 mouse device common for all mice
    [ 2.020530] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
    [ 2.028159] 44e3e000.rtc: already running
    [ 2.032737] i2c /dev entries driver
    [ 2.038088] Driver for 1-wire Dallas network protocol.
    [ 2.045107] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
    [ 2.053132] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
    [ 2.062139] cpuidle: using governor ladder
    [ 2.066528] cpuidle: using governor menu
    [ 2.071162] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
    [ 2.078426] omap_hsmmc mmc.4: Failed to get rstctl; not using any
    [ 2.084894] omap_hsmmc mmc.4: unable to select pin group
    [ 2.090811] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
    [ 2.098066] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
    [ 2.105455] mmc.4 supply vmmc_aux not found, using dummy regulator
    [ 2.112629] omap_hsmmc mmc.4: pins are not configured from the driver
    [ 2.146105] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn
    [ 2.152367] omap_hsmmc mmc.10: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn
    [ 2.160398] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn
    [ 2.166918] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
    [ 2.174116] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
    [ 2.181702] mmc.10 supply vmmc_aux not found, using dummy regulator
    [ 2.188498] omap_hsmmc mmc.10: pins are not configured from the driver
    [ 2.222474] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; ca7
    [ 2.234225] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
    [ 2.241552] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
    [ 2.250571] leds-gpio gpio-leds.7: pins are not configured from the driver
    [ 2.259053] ledtrig-cpu: registered to indicate activity on CPUs
    [ 2.265958] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
    [ 2.273272] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
    [ 2.282006] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
    [ 2.288642] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
    [ 2.295842] mmc0: host does not support reading read-only switch. assuming write-enable.
    [ 2.304464] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
    [ 2.312790] usbcore: registered new interface driver usbhid
    [ 2.318778] usbhid: USB HID core driver
    [ 2.322903] mmc0: new high speed SDHC card at address 59b4
    [ 2.329830] ashmem: initialized
    [ 2.334347] logger: created 256K log 'log_main'
    [ 2.339294] mmcblk0: mmc0:59b4 USDU1 7.37 GiB
    [ 2.345532] logger: created 256K log 'log_events'
    [ 2.350737] mmcblk0: p1 p2 p3 p4
    [ 2.355335] mmcblk0: p4 size 7695135 extends beyond EOD, truncated
    [ 2.362268] logger: created 256K log 'log_radio'
    [ 2.368661] logger: created 256K log 'log_system'
    [ 2.378431] davinci_evm sound.13: nxp-hdmi-hifi <-> 48038000.mcasp mapping ok
    [ 2.390046] TCP: cubic registered
    [ 2.393798] NET: Registered protocol family 10
    [ 2.400359] NET: Registered protocol family 17
    [ 2.405694] Key type dns_resolver registered
    [ 2.410751] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
    [ 2.418942] ThumbEE CPU extension supported.
    [ 2.423547] Registering SWP/SWPB emulation handler
    [ 2.429812] registered taskstats version 1
    [ 2.435512] slave hdmi.12: modes-blacklisted #0 -> 1920x1080@25
    [ 2.441973] slave hdmi.12: modes-blacklisted #1 -> 832x624@75
    [ 2.449909] tilcdc 4830e000.fb: No power control GPIO
    [ 2.473981] mmc1: BKOPS_EN bit is not set
    [ 2.482253] mmc1: new high speed MMC card at address 0001
    [ 2.488783] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
    [ 2.493987] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
    [ 2.500620] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
    [ 2.508373] mmcblk1: unknown partition table
    [ 2.515271] mmcblk1boot1: unknown partition table
    [ 2.522373] mmcblk1boot0: unknown partition table
    [ 2.568853] tilcdc 4830e000.fb: found TDA19988
    [ 2.574341] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.581321] [drm] No driver support for vblank timestamp query.
    [ 2.587969] tilcdc 4830e000.fb: No connectors reported connected with modes
    [ 2.595401] [drm] Cannot find any crtc or sizes - going 1024x768
    [ 2.615984] Console: switching to colour frame buffer device 128x48
    [ 2.632079] tilcdc 4830e000.fb: fb0: frame buffer device
    [ 2.637774] tilcdc 4830e000.fb: registered panic notifier
    [ 2.643577] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
    [ 2.649826] usb 1-1: new full-speed USB device number 2 using musb-hdrc
    [ 2.708294] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
    [ 2.714745] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
    [ 2.722467] libphy: 4a101000.mdio: probed
    [ 2.726777] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN80
    [ 2.736730] Detected MACID = 6c:ec:eb:67:71:38
    [ 2.741514] cpsw 4a100000.ethernet: NAPI disabled
    [ 2.748629] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:02:25 UTC (946684945)
    [ 2.765217] ALSA device list:
    [ 2.768386] #0: TI BeagleBone Black
    [ 2.805111] usb 1-1: New USB device found, idVendor=04d8, idProduct=0c03
    [ 2.812187] usb 1-1: New USB device strings: Mfr=1, Product=4, SerialNumber=0
    [ 2.819669] usb 1-1: Product: AR1100 HID-DIGITIZER
    [ 2.824694] usb 1-1: Manufacturer: Microchip Technology Inc.
    [ 2.834501] input: Microchip Technology Inc. AR1100 HID-DIGITIZER as /devices/ocp.2/47400000.usb/1
    [ 2.848618] hid-generic 0003:04D8:0C03.0001: input: USB HID v1.11 Device [Microchip Technology In0
    [ 2.867867] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.876464] VFS: Mounted root (ext4 filesystem) on device 179:2.
    [ 2.887299] devtmpfs: mounted
    [ 2.890869] Freeing init memory: 292K
    [ 2.955582] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
    [ 3.079738] init: cannot open '/initlogo.rle'
    [ 3.135295] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submic
    [ 3.213224] init: cannot find '/system/bin/sgx/rc.pvr', disabling 'pvr'
    [ 3.246244] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  • 0 in reply to hoseong son
    Mastermind 9310 points

    Hello,

    This image is not supported; it uses a 3.8 Linux kernel, which is not an official port for the Beaglebone black.
    Some things are broken, like graphic hardware acceleration.

  • 0 in reply to Adeneo Embedded support team
    Expert 1790 points
    Hi,

    May I know the official linux port version of Beagleboneblack?
  • 0 in reply to ashok kumar6
    Mastermind 9310 points

    Hello,

    The official Android 4.2.2 image supported by TI uses Linux 3.2.0