Android

Browse by Tags

Android

Welcome to the Android Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".

Tags
You have subscribed to this tag. To view or manage your tag subscriptions, click here.   Close
You have unsubscribed from this tag. To view or manage your tag subscriptions, click here.   Close
You are currently viewing:
GingerBread_2_3_4_DevKit_2_1
Related Posts

  • Forum Post: Re: gingerbread+dsp kernel panic on AM/DM37x Sitara

    Batsayan Das
    Hi, I try to use pre build images for AM37X from http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_4_DevKit_2_1/index_FDS.html (Pre-built Images--> AM37x EVM ) section Initially I can see the UI, but after some time the UI hangs with the...
    on Jul 25, 2011

  • Forum Post: How to build rootfs for AM37x.

    Pawan Rathore
    Hi, I am having Variscite EVM board. And I am successfully able to run Android GingerBread 2.3.4 on this board with kernel source provided by Vendor prebuilt rootfs of AM37x by TI Devkit which can be downloaded from http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_4_DevKit_2_1...
    on Aug 3, 2011

  • Forum Post: Re: Audio's volume is very low in beagleboard-xm on adroid 2.3.4

    Goutam Kumar
    Hi Yanbin, The default volume setting for alsa mixer is -6dB in android-2.3.4. So please check following command on prompt: >> alsa_amixer get "Digital" This would be set to value 1 (i.e. -6 dB). Hence, we need to set to 6 dB by using following command on the prompt: >>...
    on Sep 1, 2011

  • Forum Post: Re: beagleboard-xM use wl1271 bluetooth

    Faisal Hassan
    Hi hank wu, The below error is becoz of not enabled RF switch subsystem support in kernel. D/BluetoothService( 904): Bluetooth state 10 -> 11 V/BluetoothEventRedirector( 1306): Received android.bluetooth.adapter.action.STATE_CHANGED W/bluedroid( 904): open(/sys/class/rfkill/rfkill0/type...
    on Sep 19, 2011

  • Forum Post: TI_Android_GingerBread_2_3_4_DevKit_2_1 download link broken?

    Kiran Karra
    Hi, I am trying to download the sources TI_Android_GingerBread_2_3_4Sources.tar.gz from http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_4_DevKit_2_1/index_FDS.html The browser seems to hang on the download. the other download links on the website...
    on Sep 22, 2011

  • Forum Post: wpa_supplicant.conf location

    Kiran Karra
    Hi, I am trying to port the p54 drivers over to Gingerbread-2-3-4 for a custom wifi module. I've read the porting guide (http://processors.wiki.ti.com/index.php/TI-Android-GingerBread-2.3.4-DevKit-2.1_PortingGuides) related to the WiFi, and have also seen other web links which have been helpful...
    on Sep 27, 2011

  • Forum Post: Custom WiFi module - USB Problem?

    Kiran Karra
    Hi, I am trying to use a SMC2862W-G USB WiFi dongle with the beagleboard. This WiFi dongle uses the ISL3887 chipset, and thus is supported by the p54 drivers included in the Linux kernel. I have read the following websites in order to learn how to port drivers over, including - http://processors...
    on Oct 7, 2011

  • Forum Post: Problem booting TI_Android_GingerBread_2_3_4_DevKit_2_1 on Beagleboard Xm Rev C

    steve won86774
    Hi, I'm trying to put android 2.3.4 prebuilt image on the Beagleboard Xm Rev.C. I've downloaded the devkit 2.1 with prebuilt images from here: http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_4_DevKit_2_1/index_FDS.html I use Ubuntu...
    on Oct 19, 2011

  • Forum Post: Is there a GB 2.3.4 with dsp release planned for the DM37xx?

    Scott Leonard
    AM37xx got this build back in July. Can I just build the dsp back into this myself for the DM37xx? sbl
    on Oct 19, 2011

  • Forum Post: dhcpcd not working with nl80211 driver?

    Kiran Karra
    Hi all, I am trying to use the p54 wireless driver with my beagleboard, as I have a compliant wifi-dongle. I have gotten the p54 drivers to work successfully with wireless extensions (wext). By this, I mean that wpa_supplicant is run with -dwext flag (running with the wireless extensions driver)....
    on Oct 21, 2011

  • Forum Post: Booting Android Gingerbread 2.3.4 seems to succeed (console), no display however.

    Benjamin Oostveen
    Hello, I tried to boot the prebuilt image for the beagleboard xm: http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_GingerBread_2_3_4_DevKit_2_1/exports/beagleboard-xm.tar.gz I use a 4GB SD card (SDHC) which I formatted using the mkmmc-android script. I modified...
    on Oct 21, 2011

  • Forum Post: Internet connection not detected by android, beagleboard xm, gingerbread.2.3.4.

    Benjamin Oostveen
    Hi, I got Android Gingerbread.2.3.4 up and running on the Beagleboard-xm. I also managed to setup the internet connection as follows: netcfg usb0 dhcp setprop net.dns1 8.8.8.8 (8.8.8.8 is the google public dns) When i ping e.g. google.com from the android prompt it succeeds. When I open...
    on Oct 24, 2011

  • Forum Post: Interface Linux Android

    swisstronics
    Hello Im quiet new in Android development. I'm using a AM3517EVM plattform for developing. I do understand the basic App development but I haven't found much about the includes of non standard HW in an App like e.g. the user LED's on my Eval board. Does anybody know about a demo or tutorial...
    on Oct 31, 2011

  • Forum Post: Sound Recorder App File Playback

    Chris R
    I have been experimenting with the Sound Recorder app in Android 2.3.4 Gingerbread Devkit 2.1, and am having trouble getting the recorded files to play back on the system. I have confirmed that the resulting .3gpp files are playable with Quicktime on my PC, but neither the Sound Recorder's play button...
    on Nov 1, 2011

  • Forum Post: Add shell to RamDisk

    Erik Duysters
    I'm using an omap3evm board together with the rowboat gingerbread stack. As I read somewhere that rowboat does not support the standard recovery mechanism, I wanted to implement a recovery solution launched from the ramdisk. At first, boot is done from SD-card. So I have a u-boot.bin, uImage as...
    on Nov 3, 2011

  • Forum Post: How to rebuilld UARTdriver?

    steve won86774
    Hi, I'm currently using a beaglebaord Xm Rev C with the android 2.3.4 devkit 2.1 image that I've successfully built. I would like to make changes on the UART driver (rowboat-android/kernel/drivers/serial/omap-serial.c) to add management of some GPIO. I'm new to linux so please...
    on Nov 9, 2011

  • Forum Post: OMAP3530/DM3730 EVM Support for TVP5146 on Android Gingerbread 2.3.4 DevKit 2.1

    Chris R
    Is the OMAP3530 EVM's TVP514x input supported under Android Gingerbread 2.3.4 DevKit 2.1? There is code in the DevKit ( hardware/ti/omap3/camera/V4L2Camera.cpp ) that seems to be intended to support the TVP514x, but the TVP514x doesn't seem to get much mention in the DevKit documentation....
    on Nov 9, 2011

  • Forum Post: Ethernet on AM3517EVM with Android GingerBread

    swisstronics
    Hello I'm using an AM3517EVM with GingerBread 2.3.4. In the added SD Card of the DevKit with the Froyo Version it was possible to configure the eth0 to get access to Internet. How can I include this in the same way to the GingerBread Version. Does anybody know about Porting Guides or Tutorials...
    on Nov 10, 2011

  • Forum Post: omap3evm browser crash?

    Mark Nordstrand
    I was doing development and experienced this, then went back to the original image which behaves the same: If the small world icon is used to launch the browser, the page loads about 90% of the way and then goes away. If the browser is launched from the top search bar, it loads fine. This started...
    on Nov 11, 2011

  • Forum Post: unable to build the devkit8000 gingerbread source code with dsplink

    devkit anonym
    Hi, I am trying to build the gingerbread source code for devkit8000 board. It is creating the system.img file in out/target/product/devkit8000. Then it is showing error while doing dsp-link. The error is as follows: Generated: (out/target/product/devkit8000/android-info.txt) Target system...
    on Dec 12, 2011

  • Forum Post: init.rc custom process not starting up?

    Kiran Karra
    Hi all, I have added some tools to my custom build of Gingerbread 2.3.4 for the BeagleBoard. Specifically, I have gotten the linux wireless 'iw' tool installed. I would like to run a command with iw and ifconfig from my init.rc, and have tried the obvious things without any luck. The commands...
    on Jan 2, 2012

  • Forum Post: Re: init.rc custom process not starting up?

    Kiran Karra
    Hi, Thanks for responding so quickly. I tried your suggestion. At the end of my init.rc file, I had the following: # automate mesh creation service myscript /system/bin/mymod.rc oneshot In /system/bin, I have a file called mymod.rc, which contains the following code: #!/system/bin/sh iw phy...
    on Jan 3, 2012

  • Forum Post: Re: init.rc custom process not starting up?

    Kiran Karra
    Sorry I jumped the gun. I also had to change the permissions of the mymod.rc file to 755, user to root, and group to 2000, and it worked. Thanks for the help, Kiran
    on Jan 3, 2012

  • Forum Post: Problems with iproute2 cross compilation

    swisstronics
    Hi I'm trying to build the ip tool of iproute2 using: $ source build/envsetup.sh $ cd external/iproute2 $ mm TARGET_PRODUCT=am3517evm The above lines just build tc. In fact there is no Android.mk file in the ip directory. I've created an Android.mk file in external/iproute2/ ip and got...
    on Feb 2, 2012

  • Forum Post: Re: How to create a Bluetooth device in the device

    Nic90
    Hi, Is there any update on making the USB Bluetooth dongle work on Beagleboard-xm Rev-C running Android 2.3.4 DevKit 2.1? Could anybody please run me through the steps to set this up? Thanks in advance, Nikhil
    on Mar 23, 2012
12

All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI, its suppliers and providers of content reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.

TI Worldwide | Contact Us | my.TI Login | Site Map | Corporate Citizenship | mobile m.ti.com (Mobile Version)

TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.

© Copyright 1995-2013 Texas Instruments Incorporated. All rights reserved.
Trademarks | Privacy Policy | Terms of Use