Forums

I apologize for not responding on this post. We have de-emphasized the support for OpenCV and are no longer distributing the base port until we have a support strategy in place.The only way to get access to the base port of OpenCV on C6000 devices is to contact your local TI representative.

Regards,

Rahul

Hi Rahul,

Our local TI representative said that OpenCV port for fixed point DSP cannot be released to us.

I have no choice but try to port "cvCalcOpticalFlowPyrLK" using C6accel.

I am using "c6accel_1_01_00_06".

I try to follow the example in "c6accel_2_01_00_11".

There is no make error.

When I run the test application, "cvCalcOpticalFlowPyrLK" finishes in 0.7msec.

When I do printf on the array status in "cvCalcOpticalFlowPyrLK", it shows all zeroes.

It means C6accel version of "cvCalcOpticalFlowPyrLK" is called but it is not running properly.

Please give some advice on how to resolve this problem.

Can you send me an email so that I can send my source files for you to take a look ?

I have been with this problem for a week and at loss what to do.

Attached is the CE log file.

Please help me.

Thanks,

Mr Tan

1565.CE_log.txt

Hi Rahul.

Please reply to my C6accel issue .

Thanks,

Mr Tan

Rahul,

What does 'de-emphasized support' mean?  Also, you then mention that you will 'no longer distribute the base port until you have a strategy in place'.  If I put those 2 items together, are you not saying that 'we're not distributing the base port until further notice'?

Leave it to a TI person to use 2-3x more words than necessary to say a simple thing. 

This is why I'm inclined to not use TI products...there's no cohesive approach to open source and startup project support.  It's 1 step forward...1 step sideways...turn yourself around untill dizzy.

Has TI noticed the buzz around Raspberry Pi?

Just release the software and sell the hardware...is that a simple enough business model for you?

Hi Rahul:

My e-mail address is simonchu47@gmail.com.

Could you please send me how to get the OpenCV 2.3 on C674x floating point DSP.

I am now developing application on DM8168.

Thank you very much

Best regards,

Simon

Simon,

This is no longer distributed on individual basis through an ftp. Please get in touch with your local TI contact to request the software.

Regards,
Rahul