Is there a way to get the output of LOG_printf to terminal for viewing (just like printf on ARM) without requiring the use of CCS?
Unfortunately, this is not supported.
I found this http://processors.wiki.ti.com/index.php?title=Accessing_DSP_BIOS_logs_without_JTAG link. Can this not apply in my case?
What hardware platform are you using?
Are you running on the C64+ processor? Or the ARM on your DM3730?
I wasn't aware of the link that you referenced. It looks like there's instructions for C6000 but not ARM. If you're on the C64x+ core then you can give it a try.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.